A
L
D
DVANCED
INEAR
EVICES, INC.
ALD2706A/ALD2706B
ALD2706
DUAL ULTRA MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
GENERAL DESCRIPTION
FEATURES
The ALD2706 is a dual monolithic CMOS micropower high slew-rate
operational amplifier intended for a broad range of analog applications
using ±1V to ±6V dual power supply systems, as well as +2V to +12V
battery operated systems. All device characteristics are specified for +5V
single supply or ±2.5V dual supply systems. Supply current is 80µA
maximum at 5V supply voltage. It is manufactured with Advanced Linear
Devices' enhanced A CMOS silicon gate CMOS process.
• Typical 20µA supply current per amplifier
• All parameters specified for +5V single
supply or ±2.5V dual supply systems
• Rail-to-rail input and output voltage ranges
• Unity gain stable
• Extremely low input bias currents -- 0.1pA
• High source impedance applications
• Dual power supply ±1.0V to ±6.0V
• Single power supply +2V to +12V
• High voltage gain
The ALD2706 is designed to offer a trade-off of performance parameters
providing a wide range of desired specifications. It offers the popular
industry standard pin configuration.
• Unity gain bandwidth of 0.2MHz
• Slew rate of 0.1V/µs
The ALD2706 has been developed specifically for the +5V single supply or
±1V to ±6V dual supply user. Several important characteristics of the
device make application easier to implement at those voltages. First, each
operational amplifier can operate with rail to rail input and output voltages.
This means the signal input voltage and output voltage can be equal to the
positive and negative supply voltages. This feature allows numerous
analog serial stages and flexibility in input signal bias levels. Secondly,
each device was designed to accommodate mixed applications where
digital and analog circuits may operate off the same power supply or
battery. Thirdly, the output stage can typically drive up to 25pF capacitive
and 20KΩ resistive loads. These features, combined with extremely low
input currents, high open loop voltage gain of 100V/mV, useful bandwidth
of 200KHz, a slew rate of 0.1V/µs, low offset voltage and temperature drift,
make the ALD2706 a versatile, micropower dual operational amplifier.
• Symmetrical output drive
APPLICATIONS
• Voltage follower/buffer/amplifier
• Charge integrator
• Photodiode amplifier
• Data acquisition systems
• High performance portable
instruments
• Signal conditioning circuits
• Sensor and transducer amplifiers
• Low leakage amplifiers
• Active filters
• Sample/Hold amplifier
• Picoammeter
• Current to voltage converter
A typical ALD2706 has the capacity to process a 0.998V amplitude analog
signal with only 1.000V single supply voltage, while requiring only 0.1pA
input bias current.
PIN CONFIGURATION
ORDERING INFORMATION
Operating Temperature Range
+
V
8
7
1
2
OUT
-IN
A
A
-55°C to +125°C
0°C to +70°C
0°C to +70°C
OUT
-IN
B
8-Pin
8-Pin
8-Pin
3
4
6
5
+IN
B
A
-
CERDIP
Small Outline
Package (SOIC)
Plastic Dip
Package
V
+IN
B
ALD2706A DA
ALD2706B DA
ALD2706 DA
ALD2706A SA
ALD2706B SA
ALD2706 SA
ALD2706A PA
ALD2706B PA
ALD2706 PA
TOP VIEW
DA, PA, SA PACKAGE
* Contact factory for industrial temperature range
© 1998 Advanced Linear Devices, Inc. 415Tasman Drive, Sunnyvale, California 94089 -1706 Tel: (408) 747-1155 Fax: (408) 747-1286 http://www.aldinc.com