[ASAHI KASEI]
[AK7706]
Pin No.
Pin name
I/O
Function
Classification
System clock
LR channel select Clock pin
10
11
12
13
14
15
16
17
LRCLK
BITCLK
CLKO
CTRL
DVDD
DVSS
XTI
I/O SMODE="L": Slave mode: Inputs the fs clock.
SMODE="H": Master mode: Outputs the fs clock.
Serial bit clock pin
I/O SMODE="L": Slave mode: Inputs 64 fs or 48 fs clocks.
SMODE="H": Master mode: Outputs 64 fs clocks.
Clock output pin
O
Outputs the XTI clock.
Allows the output to be set to "L" when CTRL is “H”.
Clock output control pin
Control
I
CTRL=”L”: CLKO is enable.
CTRL=”H”: CLKO outputs ”L”.
Power supply pin for digital section 5V or 3.3V (typ)
+5V Digital power supply.
Power supply
-
Digital ground pin
-
System clock
Master clock input pin
I
Connect a crystal oscillator between this pin and the XTO pin, or input the external
CMOS clock signal XTI pin.
Crystal oscillator output pin
XTO
O
When a crystal oscillator is used, it should be connected between XTI and XTO.
When the external clock is used, keep this pin open
Test pin: Leave open or connect to DVSS. (Pulldown)
Test
18
19
20
TESTI1
I
I
I
Reset Control
Reset pin ( for initialization )
Used to input “L” initialize the AK7706 at power-on
Reset pin
Reset for DSP section.
INIT_RESET
DSP_RESET
Control
Slave/master mode selector pin
21
22
SMODE
JX
I
I
Set LRCLK and BITCLK to input or output mode.
SMODE="L": Slave mode (LRCLK and BITCLK are set to input mode.)
SMODE="H": Master mode (LRCLK and BITCLK are set to output mode.)
External condition jump pin (Pulldown)
Microcomputer
interface
- 6 -
<M0058-E-01>
1999/10