AH3572
HIGH VOLTAGE HIGH SENSITIVITY
HALL EFFECT OMNIPOLAR SWITCH
Description
Pin Assignments
The AH3572 is a high voltage high sensitivity Hall Effect Omnipolar
switch IC designed for proximity, position and level sensing in
consumer home appliances, office equipment, smart home to
industrial applications. To support wide range of demanding
applications, the design has been optimized to operate over the
supply range of 3.0V to 28V. With chopper stabilized architecture and
an internal bandgap regulator to provide temperature compensated
supply for internal circuits, the AH3572 provides a reliable solution
over the whole operating range. For robustness and protection, the
device has a reverse blocking diode with a Zener clamp on the
supply. The output has an over current limit and a Zener clamp...
(TOP View)
3 OUTPUT
1 VDD
GND 2
SOT23
(Front View)
3. OUTPUT
2. GND
VDD
The single open drain output can be switched on with South or North
pole of sufficient strength. When the magnetic flux density (B)
perpendicular to the package is larger than the operate point (BOP) the
output is switched on (pulled low) and is held on until magnetic flux
density B is lower than the release point (BRP).
1.
SIP-3 (Bulk Pack)
Applications
Features
•
Position and Proximity Sensing in Consumer Home Appliances,
•
•
•
•
•
Omnipolar Operation
Building Automation, Office Equipments and Industrial Applications
High Sensitivity: BOP and BRP of ±20G and ±10G Typical
Single Open Drain Output with Over Current Limit
3.0V to 28V Operating Voltage Range
Chopper Stabilized Design Provides
•
•
•
•
•
Open and Close Detect
Position Detect
Level Detect
Flow Meters
•
•
•
Superior Temperature Stability
Minimal Switch Point Drift
Contact-Less Switches
Enhanced Immunity to Stress
•
•
•
•
•
•
Good RF Noise Immunity
Reverse Blocking Diode
Zener Clamp on Supply and Output Pins
-40C to +125C Operating Temperature
ESD: HBM > 6kV
Industry Standard SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk
Pack) Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 14
www.diodes.com
February 2018
© Diodes Incorporated
AH3572
Document number: DS40412 Rev. 1 - 2