AH3241Q-AH3244Q/
AH3280Q-AH3282Q
TWO-WIRE AUTOMOTIVE HALL SWITCHES INTEGRATED SELF-DIAGNOSTICS
Description
Pin Assignments
The DIODES™ AH3241Q-AH3244Q/AH3280Q-AH3282Q are high
voltage, high sensitivity, two-wire Hall Effect Unipolar/Latch switch ICs
with integrated self-diagnostics and automotive-compliant AEC-Q100
qualification; designed for position and proximity sensing in
(Top View)
GND
automotive applications, such as seat and seatbelt buckle,
transmission actuator, gear position, wiper, door/trunk closure, etc.
To support a wide range of demanding applications, the AH3241Q-
AH3244Q/AH3280Q-AH3282Q are optimized to operate over a
supply range of 2.7V to 27V. These features include a chopper-
stabilized architecture and an internal bandgap regulator to provide
temperature compensated supply for internal circuits. For robustness
and protection, the device has built-in reverse blocking diode with a
Zener clamp on the supply.
VDD
NC
SC59 (Type A1)
The built-in thermal protection also shuts down the chip if temperature
rises to an abnormal value. This will automatically restart the chip
once the junction temperature drops below the safe value.
(Top View)
GND
NC
3
2
1
For AH3241Q, AH3242Q, AH3243Q, and AH3244Q 2-wire unipolar
switches: when the flux density (south pole) exceeds BOP, the supply
current state is turned on (low or high). The output is held until a
magnetic flux density falls below BRP, causing output current to be
turned off.
VDD
SIP-3
For AH3280Q, AH3281Q, and AH3282Q 2-wire latch switches: when
the magnetic flux density is larger than BOP, output current is turned
on (high). The output state is held until a magnetic flux density
reversal falls below BRP, causing output current to be turned off (low).
Features and Performance
Applications
Unipolar: AH3241Q, AH3242Q, AH3243Q, AH3244Q
Latch: AH3280Q, AH3281Q, AH3282Q
Output Polarity:
•
•
•
•
•
•
Position and proximity sensing in automotive applications
Seat positioning
Seatbelt buckles
Wiper positioning
Window lifters
.
.
Direct: AH3242Q, AH3243Q
Inverted: AH3241Q, AH3244Q
Wide Supply Voltage Operation: 2.7V to 27V
Temperature Coefficient -1100ppm/°C
(AH3242Q, AH3243Q, AH3244Q)
Gear selection positioning
Chopper Stabilized Design Provides:
.
.
.
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
Battery polarity reverse connection protection
Transient Spike Voltage Protection
Overtemperature Shut Down and Auto-Restart
UVLO Protection
High ESD Rating: HBM = 8kV, CDM = 1kV
Ready for ISO 26262
Temperature Range: -40°C to +150°C
Totally Lead-Free & Fully RoHS Compliant (Notes 1, 2)
Halogen and Antimony Free. “Green” Device (Note 3)
The AH3241Q-AH3244Q/AH3280Q-AH3282Q
are suitable for automotive applications requiring specific
change control; these parts are AEC-Q100 qualified, PPAP
capable, and manufactured in IATF 16949 certified facilities.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and<1000ppm antimony compounds.
1 of 19
www.diodes.com
November 2022
© Diodes Incorporated
AH3241Q-AH3244Q/AH3280Q-AH3282Q
Document number: DS41822 Rev. 5 - 2