5秒后页面跳转
AH315-PCB PDF预览

AH315-PCB

更新时间: 2024-11-21 04:05:15
品牌 Logo 应用领域
WJCI 放大器驱动
页数 文件大小 规格书
5页 322K
描述
3.3-3.8 GHz WiMAX 2W Driver Amplifier

AH315-PCB 数据手册

 浏览型号AH315-PCB的Datasheet PDF文件第2页浏览型号AH315-PCB的Datasheet PDF文件第3页浏览型号AH315-PCB的Datasheet PDF文件第4页浏览型号AH315-PCB的Datasheet PDF文件第5页 
AH315  
3.3-3.8 GHz WiMAX 2W Driver Amplifier  
Product Features  
Product Description  
Functional Diagram  
The AH315 is a high dynamic range broadband driver  
amplifier in a surface mount package. The two-stage  
amplifier has 25 dB of gain, while being able to achieve high  
performance for 3.3–3.8 GHz WiMAX/WiBro applications  
delivering +25 dBm of linear output power.  
3.3 – 3.8 GHz  
25 dB Gain  
EVM <2.5 %@ 25 dBm Pout  
Internal Active Bias  
+5V Single Supply Voltage  
+33 dBm P1dB  
Vpd1  
VBias1  
GND / NC  
RF IN  
Vcc2  
GND / NC  
AH315 uses a high reliability +5V InGaP/GaAs HBT  
process technology. The device incorporates proprietary  
bias circuitry to compensate for variations in linearity and  
current draw over temperature. The device does not require  
any negative bias voltage; an internal active bias allows the  
AH315 to operate directly off a commonly used single +5V  
supply. The RoHS-compliant/Lead-free/Green 5x5mm QFN  
package is surface mountable to allow for low  
manufacturing costs to the end user.  
RF OUT  
RF OUT  
RF OUT  
RF IN  
RoHS-compliant/Lead-free  
5x5 mm QFN SMT package  
Applications  
The AH315 is targeted for use in a configuration for the  
stage amplifier in 802.16 WiMAX basestations where high  
linearity and medium power is required.  
802.16 WiMAX infrastructure  
Specifications (1)  
Typical Performance (4)  
Parameter  
Operational Bandwidth  
Units Min Typ Max  
Parameter  
Frequency  
Units Vcc=5V Vcc=6V  
3.5  
GHz  
dBm  
dB  
3.3  
3.8  
GHz  
dBm  
dB  
3.5  
+25  
25.4  
-15.2  
-11.3  
33  
Output Channel Power  
Power Gain  
+26  
24.5  
-15.7  
-11.7  
33  
Output Channel Power  
+25  
25  
Power Gain  
EVM(2)  
S11 – Input R.L.  
S22 – Output R.L.  
dB  
%
2.3  
8
2.5  
dB  
Efficiency  
%
Output P1dB  
EVM  
dBm  
%
Output P1dB  
dBm  
dB  
+33  
7.3  
600  
2.2  
1.6  
Noise Figure  
Quiescent Current, Icq(3)  
Efficiency  
%
8
9.4  
mA  
Noise Figure  
Quiescent Current  
Vpd, Vbias  
dB  
7.3  
7.3  
Icc @26dBm  
Device Voltage, Vcc  
mA  
V
700  
+5  
mA  
V
600  
+5  
650  
+5  
1. Test conditions unless otherwise noted: 25ºC, +5V Vsupply, in 3.4-3.6 GHz tuned application circuit  
shown in page 3.  
4. Typical parameters reflect performance in a tuned application circuit at +25° C.  
2. Using an 802.16-2004 OFDMA, 64QAM-1/2,1024-FFT, 20 symbols, 30 subchannels.  
3. This corresponds to the quiescent current or operating current under small-signal conditions with  
bias resistor R1=70off pin 1 and R2=150off pin 16.  
Absolute Maximum Rating  
Parameter  
Storage Temperature  
Rating  
-55 to +125 ºC  
Thermal Resistance, Rth  
13 °C / W  
Ordering Information  
Junction Temperature, Tj  
Collector Current, Icc ( Icc1+Icc2)  
RF Input Power into a 50Load  
Device Voltage  
150 °C  
1.6 A  
19 dBm  
+8 V  
Part No.  
AH315  
AH315 –PCB  
Description  
3.3-3.8 GHz WiMAX 2W Driver Amplifier  
3.4-3.6 GHz Evaluation Board  
Device Power  
8 W  
Operation of this device above any of these parameters may cause permanent damage.  
Standard T/R size = 500 pieces on a 7” reel.  
Specifications and information are subject to change without notice.  
Page 1 of 5 December 2007  
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com