Multiformat Progressive Scan/HDTV
Encoder with Three 11-Bit DACs,
10-Bit Data Input, and Macrovision
a
ADV7196A
FUNCTIONAL BLOCK DIAGRAM
FEATURES
INPUT FORMATS
SHARPNESS
FILTER CONTROL
AND
ADAPTIVE
YCrCb in 2 ꢀ 10-Bit (4:2:2) or 3 ꢀ 10-Bit (4:4:4) Format
Compliant to SMPTE-293M (525p), ITU-R.BT1358
(625p), SMPTE274M (1080i), SMPTE296M (720p) and
Any Other High Definition Standard Using Async
Timing Mode
ADV7196A
CGMS
FILTER CONTROL
MACROVISION
11-BIT+
SYNC
DAC
DAC A (Y)
DAC B
LUMA
SSAF
Y0–Y9
Cr0–Cr9
Cb0–Cb9
CHROMA
TEST PATTERN
GENERATOR
AND
4:2:2
TO
4:4:4
(SSAF)
11-BIT
DAC
RGB in 3 ꢀ 10 Bit (4:4:4) Format
DELAY
AND
2ꢀ INTER-
POLATION
11-BIT
DAC
OUTPUT FORMATS
YPrPb Progressive Scan (EIA-770.1, EIA-770.2)
YPrPb HDTV (EIA-770.3)
RGB Levels Compliant to RS-170 and RS-343A
11-Bit and Sync (DAC A)
11-Bit DACs (DAC B, DAC C)
DAC C
GAMMA
CORRECTION
CHROMA
4:2:2
TO
4:4:4
(SSAF)
CLKIN
HORIZONTAL
SYNC
VERTICAL
SYNC
SYNC
GENERATOR
TIMING
GENERATOR
VREF
DAC CONTROL
BLOCK
I2C MPU
PORT
BLANKING
RESET
COMP
PROGRAMMABLE FEATURES
Internal Test Pattern Generator with Color Control
Y/C Delay (ꢁ)
RESET
Gamma Correction
The ADV7196A has three separate 10-bit-wide input ports which
accept data in 4:4:4 10-bit YCrCb or RGB or 4:2:2 10-bit YCrCb.
This data is accepted in progressive scan format at 27 MHz or
HDTV format at 74.25 MHz or 74.1758 MHz. For any other
high-definition standard but SMPTE 293M, ITU-R BT.1358,
SMPTE274M or SMPTE296M the Async Timing Mode can be
used to input data to the ADV7196A. For all standards, external
horizontal, vertical, and blanking signals or EAV/SAV codes control
the insertion of appropriate synchronization signals into the digital
data stream and therefore the output signals.
Individual DAC On/Off Control
54 MHz Output (2ꢀ Oversampling)
Sharpness Filter with Programmable Gain/Attenuation
Programmable Adaptive Filter Control
Undershoot Limiter
I2C® Filter
VBI Open Control
Macrovision Rev. 1.0 (525p)
CGMS-A (525p)
2-Wire Serial MPU Interface
Single Supply 3.3 V Operation
52-MQFP Package
The ADV7196A outputs analog YPrPb progressive scan format
complying to EIA-770.1, EIA-770.2; YPrPb HDTV complying
to EIA-770.3; RGB complying to RS-170/RS-343A.
APPLICATIONS
Progressive Scan/HDTV Display Devices
DVD Players
MPEG 2 at 81 MHz
Progressive Scan/HDTV Projection Systems
Digital Video Systems
High Resolution Color Graphics
Image Processing/Instrumentation
Digital Radio Modulation/Video Signal Reconstruction
The ADV7196A requires a single 3.3 V power supply, an
optional external 1.235 V reference and a 27 MHz clock in
Progressive Scan Mode or a 74.25 MHz (or 74.1758 MHz)
clock in HDTV mode.
In Progressive Scan Mode, a sharpness filter with programmable
gain allows high-frequency enhancement on the luminance signal.
Programmable Adaptive Filter Control, which may be used, allows
removal of ringing on the incoming Y data. The ADV7196A
supports CGMS-A data control generation and the Macrovision
Anticopy algorithm in 525p mode.
GENERAL DESCRIPTION
The ADV7196A is a triple high-speed, digital-to-analog encoder
on a single monolithic chip. It consists of three high-speed video
D/A converters with TTL-compatible inputs.
The ADV7196A is packaged in a 52-lead MQFP package.
I2C is a registered trademark of Philips Corporation.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2001