Data Sheet
ADuM5401/ADuM5402/ADuM5403/ADuM5404
Table 27 illustrates how isoPower devices can provide many combinations of data channel count and multiples of the single unit power.
Table 27. Configurations for Power and Data Channels
Number of Data Channels
Power Unit
0 Channels
2 Channels
4 Channels
6 Channels
1-Unit Power
ADuM5000 master
ADuM520x master
ADuM5401 to ADuM5404 master
ADuM5401 to ADuM5404 master
ADuM121x
2-Unit Power
3-Unit Power
ADuM5000 master
ADuM5000 slave
ADuM5000 master
ADuM5000 slave
ADuM5000 slave
ADuM5000 master
ADuM520x slave
ADuM5000 master
ADuM5000 slave
ADuM520x slave
ADuM5401 to ADuM5404 master
ADuM520x slave
ADuM5401 to ADuM5404 master
ADuM520x slave
ADuM5401 to ADuM5404 master
ADuM5000 slave
ADuM5000 slave
ADuM5401 to ADuM5404 master
ADuM520x slave
ADuM5000 slave
In the case of unipolar ac or dc voltage, the stress on the insulation
is significantly lower. This allows operation at higher working
voltages while still achieving a 50-year service life. The working
voltages listed in Table 20 can be applied while maintaining the
50-year minimum lifetime, provided that the voltage conforms
to either the unipolar ac or dc voltage cases.
INSULATION LIFETIME
All insulation structures eventually break down when subjected to
voltage stress over a sufficiently long period. The rate of insulation
degradation is dependent on the characteristics of the voltage
waveform applied across the insulation. In addition to the testing
performed by the regulatory agencies, Analog Devices carries
out an extensive set of evaluations to determine the lifetime
of the insulation structure within the ADuM5401/ADuM5402/
ADuM5403/ADuM5404 devices.
Any cross-insulation voltage waveform that does not conform
to Figure 31 or Figure 32 should be treated as a bipolar ac wave-
form and its peak voltage limited to the 50-year lifetime voltage
value listed in Table 20. The voltage presented in Figure 32 is
shown as sinusoidal for illustration purposes only. It is meant to
represent any voltage waveform varying between 0 V and some
limiting value. The limiting value can be positive or negative,
but the voltage cannot cross 0 V.
Analog Devices performs accelerated life testing using voltage levels
higher than the rated continuous working voltage. Acceleration
factors for several operating conditions are determined. These
factors allow calculation of the time to failure at the actual working
voltage. The values shown in Table 20 summarize the peak voltage
for 50 years of service life for a bipolar ac operating condition
and the maximum CSA/VDE approved working voltages. In
many cases, the approved working voltage is higher than the
50-year service life voltage. Operation at these high working
voltages can lead to shortened insulation life in some cases.
RATED PEAK VOLTAGE
0V
Figure 30. Bipolar AC Waveform
The insulation lifetime of the ADuM5401/ADuM5402/
ADuM5403/ADuM5404 devices depends on the voltage wave-
form type imposed across the isolation barrier. The iCoupler
insulation structure degrades at different rates depending on
whether the waveform is bipolar ac, unipolar ac, or dc. Figure 30,
Figure 31, and Figure 32 illustrate these different isolation
voltage waveforms.
RATED PEAK VOLTAGE
0V
Figure 31. DC Waveform
RATED PEAK VOLTAGE
Bipolar ac voltage is the most stringent environment. The goal
of a 50-year operating lifetime under the bipolar ac condition
determines the maximum working voltage recommended by
Analog Devices.
0V
NOTES:
1. THE VOLTAGE IS SHOWN AS SINUSOIDAL FOR ILLUSTRATION
PURPOSES ONLY. IT IS MEANT TO REPRESENT ANY VOLTAGE
WAVEFORM VARYING BETWEEN 0V AND SOME LIMITING VALUE.
THE LIMITING VALUE CAN BE POSITIVE OR NEGATIVE, BUT THE
VOLTAGE CANNOT CROSS 0V.
Figure 32. Unipolar AC Waveform
Rev. C | Page 25 of 28
5秒后页面跳转
MAX7219驱动8段数码管详解及数据手册关键信息
ATMEGA328P技术资料深入分析
AT24C02芯片手册管脚信息、参数分析、应用领域详解
AT24C256芯片手册参数分析、引脚说明、读写程序示例
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
