Bidirectional I2C Isolator with Idle-Bus Hot
Swap and Low VOL
ADuM1254
Benefits and Features
General Description
The ADuM1254 offers two bidirectional, open-drain
2
•
Low V
for Greater I C Device Compatibility
OL(MAX)
2
• Side 1: 0.69V
• Side 2: 0.4V
channels for applications, such as I C, that require data
to be transmitted in both directions on the same line. To
prevent latch-up action, side 1 outputs comprise special
buffers that regulate the logic-low voltage at 0.64V and
the input logic-low threshold is at least 50mV lower than
the output logic-low voltage. Side
conventional buffers that do not regulate logic-low output
voltage.
•
Independent V
/V Supplies Supports 3.3V
DD1 DD2
and 5V Logic Voltage Levels and Allows Level
Shifting
2
features
•
2.25V to 5.5V for Both Sides
•
Enhanced Hot Swappable Side 2 I/Os
• Initial Side 2 Connection Occurs at Bus Idle or
Stop States to Prevent Data Corruption
The ADuM1254 features independent 2.25V to 5.5V
supplies on both side 1 and side 2 of the isolator. The
device operates up to 2MHz.
2
•
•
Bidirectional I C Data Transfer up to 2MHz SCL
Bidirectional SCL for Advanced Bus Topologies
• Supports Clock Stretching and Multiple
Controllers Across Isolation Barrier
The ADuM1254 provides
a disturbance-free bus
connection for hot-plug connections on side 2 by first
precharging the bus pins and then monitoring the bus
state for either an idle bus or detection of a I C stop
condition before connecting side 1 and side 2.
•
•
Strong Current Sinking Enables Lower R
PULL-UP
2
Values for Faster Bus Speeds
• Side 1: 5mA
• Side 2: 50mA
The ADuM1254 is available in an 8-pin narrow-body
SOIC package. The device is rated for operation at
ambient temperatures of -40°C to +125°C.
Robust Galvanic Isolation of Digital Signals
• Continuously Withstands (V
)
IOWM
RMS
- 8 Narrow SOIC: 445V
• Withstands ±10kV Surge per IEC 61000-4-5
• Three Packages with Creepage and Clearance
- 8 Narrow SOIC: 4mm
Key Applications
2
•
•
•
•
Isolated I C/SMBus Interface
Battery Management Systems
Power Over Ethernet (PoE)
Motor Control Systems
•
Safety and Regulatory Approvals (Pending)
• IEC 60747-17 (Pending)
- Reinforced V
Narrow SOIC: 63V
IORM
• UL 1577 (Pending)
- 8 Narrow SOIC: 3000V
PEAK
Simplified Application Diagram
for 1min
RMS
3.3V
1.8V
• IEC/EN/CSA 62368-1 (Pending)
• IEC/EN/CSA 61010-1 (Pending
• CAN/CSA-C22.2 No. 14-18 (Pending)
0.1µF
1nF
0.1µF
1nF
V
DD1
V
DD2
ADuM1254
SDA2
SCL2
SDA
SCL
SDA
SCL
SDA1
SCL1
Ordering Information appears at end of data sheet.
µC
GND1
GND2
19-101762; Rev 0; 10/23
© 2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.