ADS7067
SBASA78A – MARCH 2021 – REVISED OCTOBER 2021
ADS7067 Small, 8-Channel, 16-Bit, 800-kSPS SAR ADC With GPIOs
1 Features
3 Description
•
•
•
Small solution size:
The ADS7067 is a small, 16-bit, 8-channel, high-
precision successive-approximation register (SAR)
analog-to-digital converter (ADC). The ADS7067 has
an integrated capless reference and a reference
buffer that helps reduce the overall solution size by
requiring fewer external components. The wafer-level-
chip-scale package and fewer external components
make this device suitable for space-constrained
applications. The device family includes the ADS7067
(800 kSPS) and the ADS7066 (250 kSPS) speed
variants.
– 1.62-mm × 1.62-mm WCSP
– Space-saving, capless, 2.5-V internal reference
8 channels configurable as any combination of:
– Up to 8 analog inputs, digital inputs, or digital
outputs
Programmable averaging filters:
– Programmable sample size for averaging
– Averaging with internal conversions
– 20-bit resolution for average output
Low-leakage multiplexer with channel sequencer:
– Manual mode
•
•
The ADS7067 features built-in offset calibration for
improved accuracy over wide operating conditions
of the system. The programmable averaging filters
enable higher resolution measurement. The eight
channels of the ADS7067 can be individually
configured as analog inputs, digital inputs, or digital
outputs that enable smaller system size and simplify
circuit design for mixed signal feedback and digital
control.
– On-the-fly mode
– Auto-sequence mode
Excellent AC and DC performance:
– SNR: 90 dB, THD: –100 dB
– Improved SNR with programmable averaging
filters
– INL: ±1 LSB, 16-bit no missing codes
– Internal calibration improves offset and drift
– High sample rate with no latency output:
800 kSPS
The enhanced-SPI enables the ADS7067 in achieving
high throughput at lower clock speeds, thereby
simplifying the board layout and lowering system cost.
The ADS7067 features a cyclic redundancy check
(CRC) for data read and write operations and the
power-up configuration.
•
•
Wide operating range:
– ADC input range: 0 V to VREF and 2 × VREF
– Analog supply: 3 V to 5.5 V
– Digital supply: 1.65 V to 5.5 V
– Temperature range: –40°C to +125°C
Enhanced-SPI digital interface:
– High-speed, 60-MHz SPI interface
Device Information(1)
PART NAME
ADS7067
PACKAGE
BODY SIZE (NOM)
WCSP (16)
1.62 mm × 1.62 mm
2 Applications
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
•
•
•
Optical modules
Optical line cards
Multiparameter patient monitors
ADS7067 Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.