3.75 Gbps Quad Bidirectional
CX4 Equalizer
ADN8102
FUNCTIONAL BLOCK DIAGRAM
FEATURES
Optimized for dc to 3.75 Gbps data
LOS_B
ADN8102
RECEIVE
EQUALIZATION
TRANSMIT
PRE-EMPHASIS
Programmable input equalization
Up to 22 dB boost at 1.875 GHz
Ix_B[3:0]
LB
PE
EQ
2:1
Ox_B[3:0]
LOS_A
Compensates up to 30 meters of CX4 cable up to 3.75 Gbps
Compensates up to 40 inches of FR4 up to 3.75 Gbps
Programmable output pre-emphasis/de-emphasis
Up to 12 dB boost at 1.875 GHz (3.75 Gbps)
Compensates up to 15 meters of CX4 cable up to 3.75 Gbps
Compensates up to 40 inches of FR4 up to 3.75 Gbps
Flexible 1.8 V to 3.3 V core supply
RECEIVE
EQUALIZATION
TRANSMIT
PRE-EMPHASIS
Ox_A[3:0]
PE
EQ
Ix_A[3:0]
2:1
Per lane P/N pair inversion for routing ease
Low power: 125 mW/channel up to 3.75 Gbps
DC- or ac-coupled differential CML inputs
Programmable CML output levels
EQ_A[1:0]
PE_A[1:0]
EQ_B[1:0]
PE_B[1:0]
ENA
ADDR[1:0]
SCL
SDA
RESET
CONTROL LOGIC
ENB
50 Ω on-chip termination
Loss-of-signal detection
Figure 1.
Temperature range operation: −40°C to +85°C
Supports 8b10b, scrambled, or uncoded NRZ data
I2C control interface
GENERAL DESCRIPTION
The ADN8102 is a quad bidirectional CX4 cable/backplane
equalizer with eight differential PECL-/CML-compatible inputs
with programmable equalization and eight differential CML
outputs with programmable output levels and pre-emphasis or
de-emphasis. The operation of this device is optimized for NRZ
data at rates up to 3.75 Gbps.
64-lead LFSCP (QFN) package
APPLICATIONS
10GBase-CX4
HiGig™
InfiniBand
1×, 2× Fibre Channel
XAUI
Gigabit Ethernet over backplane or cable
CPRI™
50 Ω cables
The receive inputs provide programmable equalization to
compensate for up to 30 meters of CX4 cable (24 AWG) or
40 inches of FR4, and programmable pre-emphasis to compensate
for up to 15 meters of CX4 cable (24 AWG) or 40 inches of FR4
at 3.75 Gbps. Each channel also provides programmable loss-of-
signal detection and loopback capability for system testing and
debugging.
The ADN8102 is controlled through toggle pins, an I2C® control
interface that provides more flexible control, or a combination of
both. Every channel implements an asynchronous path supporting
dc to 3.75 Gbps NRZ data, fully independent of other channels. The
ADN8102 has low latency and very low channel-to-channel skew.
The main application for the ADN8102 is to support switching
in chassis-to-chassis applications over CX4 or InfiniBand® cables.
The ADN8102 is packaged in a 9 mm × 9 mm 64-lead LFCSP
(QFN) package and operates from −40°C to +85°C.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2008 Analog Devices, Inc. All rights reserved.