Microprocessor Supervisory Circuits
in 3-Lead SC70 and SOT-23
Data Sheet
ADM803/ADM809/ADM810
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Specified over temperature
Low power consumption: 17 μA
ADM803
Precision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V options
Reset assertion down to 1 V VCC
140 ms minimum power-on reset
V
CC
RESET
GENERATOR
240ms
RESET
V
REF
Open-drain
output (ADM803)
RESET
Push-pull
output (ADM809)
RESET
GND
Push-pull RESET output (ADM810)
SC70 and SOT-23 packages
ADM809/ADM810
APPLICATIONS
RESET
GENERATOR
240ms
Microprocessor systems
Computers
V
CC
RESET
(RESET)
V
REF
Controllers
Intelligent instruments
GND
V
CC
V
V
CC
*R
CC
PULL-UP
MICROPROCESSOR
SYSTEM
ADM803/ADM809
RESET
INPUT
RESET
GND
GND
*ADM803 ONLY
Figure 1.
GENERAL DESCRIPTION
The ADM803/ADM809/ADM810 supervisory circuits monitor
the power supply voltage in microprocessor systems. They
provide a reset output during power-up, power-down, and
brownout conditions. On power-up, an internal timer holds
reset asserted for 240 ms. This holds the microprocessor in a
reset state until conditions have stabilized. The reset output
remains operational with VCC as low as 1 V. The ADM803 and
Seven reset threshold voltage options are available, suitable for
monitoring a variety of supply voltages (see Table 3).
The reset comparator features built-in glitch immunity, making
it immune to fast transients on VCC
.
The ADM803/ADM809/ADM810 consume only 17 μA, making
them suitable for low power, portable equipment. The ADM803
is available in a 3-lead SC70; the ADM809/ADM810 are available
in 3-lead SOT-23 and 3-lead SC70 packages.
RESET
ADM809 provide an active low reset signal (
), whereas
the ADM810 provides an active high signal (RESET) output.
The ADM809 and ADM810 have push-pull outputs, whereas
the ADM803 has an open-drain output, which requires an
external pull-up resistor.
Rev. I
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©1997–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com