CMOS Switched-Capacitor
Voltage Converters
ADM660/ADM8660
TYPICAL CIRCUIT CONFIGURATIONS
FEATURES
ADM660: Inverts or Doubles Input Supply Voltage
ADM8660: Inverts Input Supply Voltage
100 mA Output Current
+1.5V TO +7V
INPUT
Shutdown Function (ADM8660)
2.2 F or 10 F Capacitors
0.3 V Drop at 30 mA Load
+1.5 V to +7 V Supply
V+
FC
ADM660
OSC
CAP+
+
C1
10F
LV
GND
INVERTED
NEGATIVE
OUTPUT
Low Power CMOS: 600 A Quiescent Current
Selectable Charge Pump Frequency (25 kHz/120 kHz)
Pin Compatible Upgrade for MAX660, MAX665, ICL7660
Available in 16-Lead TSSOP Package
CAP–
OUT
C2
10F
+
Voltage Inverter Configuration (ADM660)
APPLICATIONS
Handheld Instruments
Portable Computers
Remote Data Acquisition
Op Amp Power Supplies
+1.5V TO +7V
INPUT
V+
FC
ADM8660
CAP+
+
10F
LV
C1
GND
INVERTED
NEGATIVE
OUTPUT
GENERAL DESCRIPTION
The ADM660/ADM8660 is a charge-pump voltage converter
that can be used to either invert the input supply voltage giving
OUT
CAP–
SD
C2
SHUTDOWN
CONTROL
10F
+
VOUT = –VIN or double it (ADM660 only) giving VOUT = 2 ϫ VIN
.
Voltage Inverter Configuration with Shutdown (ADM8660)
Input voltages ranging from +1.5 V to +7 V can be inverted into
a negative –1.5 V to –7 V output supply. This inverting scheme
is ideal for generating a negative rail in single power supply
systems. Only two small external capacitors are needed for the
charge pump. Output currents up to 50 mA with greater than
90% efficiency are achievable, while 100 mA achieves greater
than 80% efficiency.
The ADM660 is a pin compatible upgrade for the MAX660,
MAX665, ICL7660, and LTC1046.
The ADM660/ADM8660 is available in 8-lead DIP and
narrow-body SOIC. The ADM660 is also available in a 16-lead
TSSOP package.
A Frequency Control (FC) input pin is used to select either
25 kHz or 120 kHz charge-pump operation. This is used to
optimize capacitor size and quiescent current. With 25 kHz
selected, a 10 µF external capacitor is suitable, while with 120 kHz
the capacitor may be reduced to 2.2 µF. The oscillator frequency
on the ADM660 can also be controlled with an external capacitor
connected to the OSC input or by driving this input with an
external clock. In applications where a higher supply voltage is
desired it is possible to use the ADM660 to double the input
voltage. With input voltages from 2.5 V to 7 V, output voltages
from 5 V to 14 V are achievable with up to 100 mA output current.
ADM660/ADM8660 Options
Option
ADM660
ADM8660
Inverting Mode
Doubling Mode
External Oscillator
Shutdown
Y
Y
Y
N
Y
N
N
Y
Package Options
R-8
N-8
Y
Y
Y
Y
Y
N
The ADM8660 features a low power shutdown (SD) pin instead
of the external oscillator (OSC) pin. This can be used to disable
the device and reduce the quiescent current to 300 nA.
RU-16
C
REV.
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
781/461-3113
www.analog.com
Analog Devices, Inc. All rights reserved.
2011
Fax:
©