± ±0.8% AAcurat%ꢀcrꢁ%ꢂUV/U%
PosiaivtVNtgraivt%Uolargt%Scptuvisou
DM12914
%
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
CC
TIMER
Quad undervoltage/overvoltage (UV/OV) positive/negative
supervisor
Supervises up to two negative rails
Adjustable UV and OV input thresholds
Industry leading threshold accuracy over the extended
temperature range: 0.8ꢀ
ADM12914
VH1
TIMER
500mV
500mV
VL1
VH2
1 V buffered reference output
UV
UV
OV
reset outputs
Open-drain
and
Adjustable reset timeout with disable option
Outputs guaranteed down to VCC of 1 V
Glitch immunity
VL2
VH3
OUTPUT
LOGIC
62 μA supply current
16-lead QSOP package
Specified from −40°C to +125°C
500mV
500mV
OV
VL3
VH4
APPLICATIONS
Server supply monitoring
FPGA/DSP core and I/O voltage monitoring
Telecommunications equipment
Medical equipment
MUX
LOGIC
REF
LATCH/DIS
REF
VL4
SEL
GND
Figure 1.
requires a resistor to be placed between the main supply rail and
the VCC pin to limit the current flow into the VCC pin at a level
no greater than 10 mA. The ADM12914 uses the internal shunt
regulator to regulate VCC if the supply line exceeds the absolute
maximum ratings.
GENERAL DESCRIPTION
The ADM12914 is a quad voltage supervisory IC ideally suited
for monitoring multiple rails in a wide range of applications.
Each monitored rail has two dedicated input pins, VHx and VLx,
which allows each rail to be monitored for both undervoltage
(UV) and overvoltage (OV) conditions with high threshold
The ADM12914 is available in two models. The ADM12914-1
offers a latching overvoltage output that can be cleared by
UV
accuracy of 0.8%. Common active low undervoltage ( ) and
LATCH
toggling the
input pin. The ADM12914-2 has a disable
OV
overvoltage ( ) pins are shared by each of the monitored
UV
OV
and the
pin that can override and disable both the
output signals.
voltage rails.
The ADM12914 includes a 1 V buffered reference output, REF,
that acts as an offset when monitoring a negative voltage. The
three-state SEL pin determines the polarity of the third and
fourth inputs, that is, it configures the device to monitor
positive or negative supplies.
The ADM12914 is available in a 16-lead QSOP package. The
device is specified over the extended temperature range of
−40°C to +125°C.
The device incorporates an internal shunt regulator that enables
the device to be used in higher voltage systems. This feature
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks are theproperty of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2009 Analog Devices, Inc. All rights reserved.