Power Supplies
ADLPS104-150, 150W ATX Power Supply
Features
PCI/104-Express Form Factor (90mm x 96mm)
Two Variants Available:
ADLPS104-150-5: Input: 7-30V, Output: 5V, 5VS, 3.3V
(optional 7-36V available)
ADLPS104-150-12: Input: 14-36V, Output: 5V, 5VS, 3.3V, 12V
Voltage and Current Specifications (common all variants):
Maximum Input Current = 15A
Maximum Power = 150W Combined
Available Output Current: 5VS/5A, 5V/20A, 3.3V/5A, 12V/10A
36V Input Voltage Option Available Upon Request.
Enhanced EMI Circuitry Designed for IEC 55022 cl. B Emission and
EN 55024 Immunity Compliance
MTBF > 500,000 Hours
Input Protection:
Overcurrent
Overvoltage / Undervoltage / Surge
Reverse Voltage
Output Protection:
Voltage Out of Range (monitored via PWRGD)
Short-circuit
ATX Compliant Signals Available (PS-ON, PWRGD etc.)
Temperature Range: -25C to +70C Standard
Description
Option Available for -40C to +85C with 293034 Heat Spreader
The ADLPS104-150 power supply board is designed to meet the
needs of high-powered Intel® Core™ industrial and embedded
motherboards by providing robust ATX voltages (5V, 5VS, 3.3V,
12V) in a stackable PCI/104-Express form factor designed for -40C
to +85C operation at 150W. Its small (90mm x 96mm) footprint
allows it to fit in many space limited applications. As well, the
ADLPS104-150 is tailored to work in conjunction with our
ADLQM67PC Sandy Bridge SBC with more than enough headroom
for inrush startup currents, and quiescent operation with multiple
peripheral cards. Of course, it is also an economical choice for the
ADLGS45PC and other lower power platforms.
Ordering Information
Item Code
Part #
293033
293032
Description
ADLPS104-150-12
ADLPS104-150-5
ADLPS104-150-12, 5V, 5VS, 12V, 3,3V, ET
ADLPS104-150-5, 5V, 5VS, 3.3V, ET
(optional 7-36V available)
*Cables included with each unit
The ADLPS104-150 features ATX compliant signaling to allow AC-
PI/APM power management from within compliant operating sys-
tems. The ADLPS104-150 is available in two variants, one allowing
an input voltage range of 7-30V but providing only the 5V, 5VS, and
3.3V outputs, the other with a narrower input voltage range of 14-
36V but providing 5V, 5VS, 3.3V and 12V outputs.
Accessories
ADLPS104-150-HSP
293034
293031
ADLPS104-150 Heat spreader for -40C to +85C
operation; hardware kit included
MILCOTS-FILTER
MIL-STD 704/1275/461 Input Filter; 120w max.
The board is protected against many types of input power anoma-
lies, such as over-currents, voltage deviations and voltage surge.
Short bursts of over-current are simply filtered out. Should overvolt-
age or under voltage situation persist too long, the power supply
shuts off. Noise interference is dampened by up to 35dB. The out-
put is protected against reverse voltage and short-circuit. Additional-
ly, the power supply design does not include the use of electrolytic
capacitors, thus dramatically increasing the lifespan of the power
supply.
Data subject to change without notice.
ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen,
Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20
e-mail: sales@adl-europe.com; web: www.adl-europe.com
ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101
San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599
e-mail: sales@adl-usa.com; web: www.adl-usa.com
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
