July 1999
ADC12H030/ADC12H032/ADC12H034/ADC12H038,
ADC12030/ADC12032/ADC12034/ADC12038
Self-Calibrating 12-Bit Plus Sign Serial I/O A/D
Converters with MUX and Sample/Hold
General Description
Features
n Serial I/O (MICROWIRE Compatible)
The ADC12030, and ADC12H030 families are 12-bit plus
sign successive approximation A/D converters with serial I/O
and configurable input multiplexers. The ADC12032/
ADC12H032, ADC12034/ADC12H034 and ADC12038/
ADC12H038 have 2, 4 and 8 channel multiplexers, respec-
tively. The differential multiplexer outputs and A/D inputs are
available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2
pins. The ADC12030/ADC12H030 has a two channel multi-
plexer with the multiplexer outputs and A/D inputs internally
connected. The ADC12030 family is tested with a 5 MHz
clock, while the ADC12H030 family is tested with an 8 MHz
clock. On request, these A/Ds go through a self calibration
process that adjusts linearity, zero and full-scale errors to
n 2, 4, or 8 channel differential or single-ended multiplexer
n Analog input sample/hold function
n Power down mode
n Variable resolution and conversion rate
n Programmable acquisition time
n Variable digital output word length and format
n No zero or full scale adjustment required
n Fully tested and guaranteed with a 4.096V reference
n 0V to 5V analog input range with single 5V power
supply
n No Missing Codes over temperature
±
less than 1 LSB each.
The analog inputs can be configured to operate in various
Key Specifications
combinations
of
single-ended,
differential,
or
n Resolution
12-bit plus sign
pseudo-differential modes. A fully differential unipolar analog
input range (0V to +5V) can be accommodated with a single
+5V supply. In the differential modes, valid outputs are ob-
tained even when the negative inputs are greater than the
positive because of the 12-bit plus sign output data format.
n 12-bit plus sign conversion time
— ADC12H030 family
— ADC12030 family
n 12-bit plus sign throughput time
— ADC12H030 family
— ADC12030 family
n Integral linearity error
n Single supply
5.5 µs (max)
8.8 µs (max)
8.6 µs (max)
14 µs (max)
The serial I/O is configured to comply with the
™
NSC MICROWIRE
LM4040 or LM4041.
. For voltage references see the
±
1 LSB (max)
±
5V 10%
n Power dissipation
— Power down
33 mW (max)
100 µW (typ)
Applications
n Medical instruments
n Process control systems
n Test equipment
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
™
™
™
COPS microcontrollers, HPC and MICROWIRE are trademarks of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation
DS011354
www.national.com