PCL-720+
64-ch Digital I/O and Counter ISA Card
Features
. 32 TTL-level digital input channels
. 32 TTL-level digital output channels
. High-output driving capacity
. Low-input loading
. 3 programmable counter/timer channels
. User configurable clock source
. Breadboard area for custom circuits
RoHS
COMPLIANT
2002/95/EC
Introduction
The PCL-720+ digital I/O and counter card is PC-compatible add-on cards with 32 digital input channels, 32 digital output channels and three programmable counter/timer channels.
Their digital I/O channels are TTL-compatible and use 74LS244 driver/ buffer circuits to provide high output driving capacity. These buffered circuits also require lower input loading
current than regular TTL circuits. The cards' 8254 programmable counter/timer provides three flexible 16-bit counter/timer channels. You can generate waves and pulses by programming
the 8254. Jumper settings determine the clock crystal frequency. The cards also includes a breadboard area perfect for customized circuits.
Specifications
Digital Input
General
. Channels
. Compatibility
. Input Voltage
32
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
. Breadboard Area
540 (30 x 18) plated-through "donuts", each with a
.036" hole on 0.10" centers. Further, provide +5 V on
the left side, and provide GND on the right side
. Bus Type
ISA
. I/O Connectors
. Dimensions (L x H)
. Power Consumption
5 x 20-pin box header
185 x 100 mm (7.3" x 4")
+5 V @ 500 mA
Digital Output
. Channels
32
. Compatibility
. Output Voltage
5 V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V max. @ 24 mA
Source: 2.0 V min. @ 15 mA
. Operating Temperature 0 ~ 60° C (32 ~ 140° F)
. Storage Temperature
. Storage Humidity
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
. Output Capability
Ordering Information
Counter/Timer
. Channels
. Resolution
. Compatibility
. Max. Input Frequency 1 MHz
. Reference Clock
. PCL-720+
. PCL-10120-1
. PCL-10120-2
. PCLD-780
. PCLD-782
. PCLD-785
. PCLD-786
. PCLD-885
. ADAM-3920
64-ch Digital I/O and Counter ISA Card
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
Screw Terminal Board w/ Two 20-pin Flat Cables
16-ch Isolated DI Board w/ 1 m 20-pin Flat Cable
16-ch Relay Board w/ One 1 m 20-pin Flat Cable
8-ch SSR I/O Module Board w/ 20-pin Flat Cable
16-ch Power Relay Board w/ 20p & 50p Flat Cables
20-pin DIN-rail Flat Cable Wiring Board
3
16 bits
5 V/TTL
Internal:
Selectable 1 MHz, 100 kHz, or 10 kHz base clock
External Clock Frequency: Jumper selectable divider: x2, x1, x0.5, and x0.25
. Programmable Counter 6
Modes
Data Acquisition Boards