Low Power
Differential ADC Driver
ADA4932-1/ADA4932-2
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
High performance at low power
High speed
−3 dB bandwidth of 560 MHz, G = 1
0.1 dB gain flatness to 300 MHz
Slew rate: 2800 V/µs, 25% to 75%
Fast 0.1% settling time of 9 ns
Low power: 9.6 mA per amplifier
Low harmonic distortion
ADA4932-1
12 PD
–FB
+IN
–IN
1
2
3
4
11 –OUT
10 +OUT
+FB
9
V
OCM
100 dB SFDR @ 10 MHz
90 dB SFDR @ 20 MHz
Figure 1. ADA4932-1
Low input voltage noise: 3.6 nV/√Hz
0.5 mV typical input offset voltage
Externally adjustable gain
Can be used with fractional differential gains
Differential-to-differential or single-ended-to-differential
operation
Adjustable output common-mode voltage
Wide supply range: +3 V to 5 V
Available in 16-lead and 24-lead LFCSP packages
–IN1
+FB1
1
2
3
4
5
6
18 +OUT1
17 V
OCM1
16 –V
+V
S2
S2
S1
ADA4932-2
–V
15
14
+V
S1
–FB2
+IN2
PD2
13 –OUT2
APPLICATIONS
ADC drivers
Figure 2. ADA4932-2
Single-ended-to-differential converters
IF and baseband gain blocks
Differential buffers
–40
–50
V
= 2V p-p
OUT, dm
HD2, G = 1
HD3, G = 1
HD2, G = 2
HD3, G = 2
–60
Line drivers
–70
GENERAL DESCRIPTION
–80
The ADA4932-x is the next generation AD8132 with higher
performance, and lower noise and power consumption. It is an
ideal choice for driving high performance ADCs as a single-ended-
to-differential or differential-to-differential amplifier. The output
common-mode voltage is user adjustable by means of an internal
common-mode feedback loop, allowing the ADA4932-x output
to match the input of the ADC. The internal feedback loop also
provides exceptional output balance as well as suppression of
even-order harmonic distortion products.
–90
–100
–110
–120
–130
–140
100k
1M
10M
FREQUENCY (Hz)
100M
Figure 3. Harmonic Distortion vs. Frequency at Various Gains
With the ADA4932-x, differential gain configurations are easily
realized with a simple external four-resistor feedback network that
determines the closed-loop gain of the amplifier.
The ADA4932-x is available in a Pb-free, 3 mm × 3 mm 16-lead
LFCSP (ADA4932-1, single) or a Pb-free, 4 mm × 4 mm 24-lead
LFCSP (ADA4932-2, dual). The pinout has been optimized to
facilitate PCB layout and minimize distortion. The ADA4932-1
and the ADA4932-2 are specified to operate over the −40°C to
+105°C temperature range; both operate on supplies between
+3 V and 5 V.
The ADA4932-x is fabricated using the Analog Devices, Inc.,
proprietary silicon-germanium (SiGe) complementary bipolar
process, enabling it to achieve low levels of distortion and noise
at low power consumption. The low offset and excellent dynamic
performance of the ADA4932-x make it well suited for a wide
variety of data acquisition and signal processing applications.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2008 Analog Devices, Inc. All rights reserved.