Data Sheet
AD8417-2
1 mm × 1.9 mm WLCSP, High Common-Mode, Bidirectional, Zero Drift, Current
Sense Amplifier
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► Typical 0.1 µV/°C offset drift
► Maximum ±400 µV voltage offset over full temperature range
► 2.7 V to 5.5 V power supply operating range
► Electromagnetic interference (EMI) filters included
► High common-mode input voltage range
► −2 V to +42 V continuous
► Initial gain = 60 V/V
► Wide operating temperature range: −40°C to +125°C
► Bidirectional operation
► Dual channel in a small 1 mm × 1.9 mm WLCSP
► Common-mode rejection ratio (CMRR): 86 dB, dc to 10 kHz
APPLICATIONS
Figure 2. Functional Block Diagram
► High-side current sensing in:
► Motor controls
GENERAL DESCRIPTION
► Solenoid controls
The AD8417-2 is a high voltage, high resolution, and dual channel
current sense amplifier. It features an initial gain of 60 V/V, with a
maximum ±0.3% gain error over the entire temperature range. The
AD8417-2 performs bidirectional current measurements across a
shunt resistor in a variety of applications, including motor control,
power management, and solenoid control.
► Power management
► Low-side current sensing
► Diagnostic protection
TYPICAL APPLICATION CIRCUIT
The AD8417-2 offers breakthrough performance throughout the
−40°C to +125°C temperature range. It features a zero drift core,
which leads to a typical offset drift of 0.1 µV/°C throughout the
operating temperature range and the common-mode voltage range.
The device includes EMI filters and patented circuitry to enable
output accuracy with pulse-width modulation (PWM) type input
common-mode voltages. The typical input offset voltage is ±200 µV.
The AD8417-2 is offered in a small 10-ball 1 mm × 1.9 mm WLCSP.
It requires a smaller board area than a typical single-channel
current sense amplifier, increasing channel density, without compro-
mising performance.
Figure 1. 3-Phase Motor Control
Table 1. Related Devices
Part No.
Description
AD8205
AD8206
AD8207
AD8210
AD8417
AD8418A
Current sense amplifier, gain = 50
Current sense amplifier, gain = 20
High accuracy current-sense amplifier, gain = 20
High speed current sense amplifier, gain = 20
High accuracy current sense amplifier, gain = 60
High accuracy current sense amplifier, gain = 20
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT