260 MHz, 16 ꢀ 8 Buffered
Video Crosspoint Switches
a
AD8110/AD8111
FEATURES
FUNCTIONAL BLOCK DIAGRAM
16 ꢀ 8 High-Speed Nonblocking Switch Arrays
AD8110: G = +1
SER/PAR D0 D1 D2 D3 D4
AD8111: G = +2
A0
A1
Serial or Parallel Switch Array Control
Serial Data Out Allows “Daisy Chaining” of Multiple
Crosspoints to Create Larger Switch Arrays
Pin-Compatible with AD8108/AD8109 8 ꢀ 8 Switch
Arrays
CLK
A2
40-BIT SHIFT REGISTER
WITH 5-BIT
DATA
DATA IN
PARALLEL LOADING
OUT
For a 16 ꢀ 16 Array See AD8116
Complete Solution
Buffered Inputs
Eight Output Amplifiers, AD8110 (G = +1),
AD8111 (G = +2)
UPDATE
40
SET INDIVIDUAL
OR RESET ALL
OUTPUTS
PARALLEL LATCH
40
CE
RESET
TO "OFF"
8
DECODE
8 ꢀ 5:16 DECODERS
Drives 150 V Loads
OUTPUT
AD8110/AD8111
Excellent Video Performance
60 MHz 0.1 dB Gain Flatness
0.02% Differential Gain Error (RL = 150 V)
0.028 Differential Phase Error (RL = 150 V)
Excellent AC Performance
BUFFER
G = +1,
G = +2
128
260 MHz –3 dB Bandwidth
500 V/ms Slew Rate
SWITCH
MATRIX
Low Power of 50 mA
16 INPUTS
8 OUTPUTS
Low All Hostile Crosstalk of –78 dB @ 5 MHz
Output Disable Allows Direct Connection of Multiple
Device Outputs
Reset Pin Allows Disabling of All Outputs (Connected
Through a Capacitor to Ground Provides “Power-
On” Reset Capability)
Excellent ESD Rating: Exceeds 4000 V Human Body
Model
80-Lead LQFP Package (12 mm ꢀ 12 mm)
phase of better than 0.02% and 0.02° respectively, along with
0.1 dB flatness out to 60 MHz, make the AD8110/AD8111
ideal for video signal switching.
APPLICATIONS
Routing of High-Speed Signals Including:
Composite Video (NTSC, PAL, S, SECAM)
Component Video (YUV, RGB)
Compressed Video (MPEG, Wavelet)
3-Level Digital Video (HDB3)
The AD8110 and AD8111 include eight independent output
buffers that can be placed into a high impedance state for paral-
leling crosspoint outputs so that off channels do not load the
output bus. The AD8110 has a gain of +1, while the AD8111
offers a gain of +2. They operate on voltage supplies of 5 V
while consuming only 50 mA of idle current. The channel
switching is performed via a serial digital control (which can
accommodate “daisy chaining” of several devices) or via a parallel
control, allowing updating of an individual output without repro-
gramming the entire array.
PRODUCT DESCRIPTION
The AD8110 and AD8111 are high-speed 16 × 8 video cross-
point switch matrices. They offer a –3 dB signal bandwidth
greater than 260 MHz, and channel switch times of less than
25 ns with 1% settling. With –78 dB of crosstalk and –97 dB
isolation (@ 5 MHz), the AD8110/AD8111 are useful in many
high-speed applications. The differential gain and differential
The AD8110/AD8111 is packaged in an 80-lead LQFP package
and is available over the extended industrial temperature range
of –40°C to +85°C.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002