600 MHz, 32 × 16 Buffered
Analog Crosspoint Switch
AD8104/AD8105
FEATURES
FUNCTIONAL BLOCK DIAGRAM
D0 D1 D2 D3 D4 D5
VDD
DGND
High channel count, 32 × 16 high speed, nonblocking
switch array
A0
A1
A2
A3
AD8104/
AD8105
Differential or single-ended operation
Differential G = +1 (AD8104) or G = +2 (AD8105)
Pin compatible with AD8117/AD8118, 32 × 32 switch arrays
Flexible power supplies
Single +5 V supply, or dual 2.5 V supplies
Serial or parallel programming of switch array
High impedance output disable allows connection of
multiple devices with minimal loading on output bus
Excellent video performance
SER/PAR
WE
1
0
192-BIT SHIFT REGISTER
WITH 6-BIT
DATA
OUT
CLK
PARALLEL LOADING
DATA IN
96
96
UPDATE
RESET
NO
PARALLEL LATCH
CONNECT
96
DECODE
16 × 6:32 DECODERS
16
>50 MHz 0.1 dB gain flatness
0.05% differential gain error (RL = 150 Ω)
0.05° phase error (RL = 150 Ω)
Excellent ac performance
INPUT
512
OUTPUT
BUFFER
G = +1
RECEIVER
G = +1*
G = +2**
2
2
Bandwidth: 600 MHz
Slew rate: 1800 V/μs
Settling time: 2.5 ns to 1%
Low power of 1.7 W
Low all hostile crosstalk
< −70 dB @ 5 MHz
SWITCH
MATRIX
< −40 dB @ 600 MHz
Reset pin allows disabling of all outputs (connected through
a capacitor to ground provides power-on reset capability)
304-ball BGA package (31 mm × 31 mm)
APPLICATIONS
*AD8104 ONLY
**AD8105 ONLY
VPOS VNEG
VOCM
Routing of high speed signals including
RGB and component video routing
KVM
Figure 1.
Compressed video (MPEG, wavelet)
Data communications
while the AD8105 has a differential gain of +2 for ease of use
in back-terminated load applications. They operate as fully
differential devices or can be configured for single-ended
operation. Either a single +5 V supply or dual 2.5 V supplies
can be used, while consuming only 340 mA of idle current with
all outputs enabled. The channel switching is performed via a
double-buffered, serial digital control (which can accommodate
daisy-chaining of several devices), or via a parallel control,
allowing updating of an individual output without reprogram-
ming the entire array.
GENERAL DESCRIPTION
The AD8104/AD8105 are high speed, 32 × 16 analog crosspoint
switch matrices. They offer 600 MHz bandwidth and slew rate of
1800 V/μs for high resolution computer graphics (RGB) signal
switching. With less than −70 dB of crosstalk and −90 dB isola-
tion (@ 5 MHz), the AD8104/AD8105 are useful in many high
speed applications. The 0.1 dB flatness, which is greater than
50 MHz, makes the AD8104/AD8105 ideal for composite video
switching.
The AD8104/AD8105 include 16 independent output buffers
that can be placed into a high impedance state for paralleling
crosspoint outputs so that off-channels present minimal loading
to an output bus. The AD8104 has a differential gain of +1,
The AD8104/AD8105 are packaged in a 304-ball BGA package
and are available over the extended industrial temperature
range of −40°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2007 Analog Devices, Inc. All rights reserved.