Dual Pseudo Differential 16-Bit, 1 MSPS
PulSAR ADC 12.0 mW in QSOP
Data Sheet
AD7902
FEATURES
GENERAL DESCRIPTION
16-bit resolution with no missing codes
Throughput: 1 MSPS
Low power dissipation
7.0 mW at 1 MSPS (VDD1 and VDD2 only)
12.0 mW at 1 MSPS (total)
140 µW at 10 kSPS
INL: 1.0 LSB typical, 2.5 LSB maximum
SINAD: 91 dB at 1 kHz
THD: −105 dB at 1 kHz
The AD7902 is a dual 16-bit, successive approximation, analog-
to-digital converter (ADC) that operates from a single power
supply, VDDx, per ADC. It contains two low power, high speed,
16-bit sampling ADCs and a versatile serial port interface (SPI).
On the CNVx rising edge, the AD7902 samples an analog input,
IN+, in the range of 0 V to VREF with respect to a ground sense,
IN−. The externally applied reference voltage of the REFx pins
(VREF) can be set independently from the supply voltage pins,
VDDx. The power of the device scales linearly with throughput.
Pseudo differential analog input range
0 V to VREF with VREF between 2.4 V to 5.1 V
Allows use of any input range
Easy to drive with the ADA4841-1/ADA4841-2
No pipeline delay
Using the SDIx inputs, the SPI-compatible serial interface can
also daisy-chain multiple ADCs on a single 3-wire bus and provide
an optional busy indicator. It is compatible with 1.8 V, 2.5 V, 3 V,
or 5 V logic, using the separate VIOx supplies.
The AD7902 is available in a 20-lead QSOP package with
operation specified from −40°C to +125°C.
Single-supply 2.5 V operation with 1.8 V/2.5 V/3 V/5 V logic
interface
Serial port interface (SPI) QSPI/MICROWIRE/DSP compatible
20-lead QSOP package
Table 1. MSOP 14-/16-/18-Bit PulSAR® ADCs
400 kSPS
Bits 100 kSPS
250 kSPS to 500 kSPS 1000 kSPS ADC Driver
Wide operating temperature range: −40°C to +125°C
18
AD76911 AD76901
AD79821
ADA4941-1
ADA4841-1
ADA4841-2
ADA4941-1
ADA4841-1
ADA4841-2
APPLICATIONS
Battery-powered equipment
Communications
Automated test equipment (ATE)
Data acquisition
Medical instrumentation
Redundant measurement
Simultaneous sampling
16
AD7680
AD7683
AD7684
AD7940
AD76851 AD76861
AD76871 AD76881
AD7694
AD79421 AD79461
AD79801
AD7903
AD7902
AD76931
14
1 Pin-for-pin compatible.
FUNCTIONAL BLOCK DIAGRAM
REF = 2.5V TO 5V
2.5V
REF1 REF2 VDD1 VDD2
VIO1
SDI1
VIO1/VIO2
0V TO VREF
IN1+
SDI1/SDI2
SCK1/SCK2
CNV1/CNV2
SDO1
SCK1
CNV1
SDO1
ADC1
IN1–
VIO2
SDI2
3-WIRE OR 4-WIRE
INTERFACE
0V TO VREF
IN2+
(SPI, CS, AND
CHAIN MODES)
SCK2
CNV2
SDO2
ADC2
IN2–
SDO2
GND
AD7902
Figure 1.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com