AAT3687
Lithium-Ion/Polymer Battery Charger
™
BatteryManager
General Description
Features
The AAT3687 BatteryManager is a member of
AnalogicTech's Total Power Management IC™
(TPMIC™) product family. This device is a highly
integrated single-cell lithium-ion/polymer battery
charger IC designed to operate with AC adapter
inputs. It requires a minimum number of external
components. The AAT3687 precisely regulates
battery charge voltage and current for 4.2V lithium-
ion/polymer battery cells. Adapter charge current
rates can be programmed up to 1.5A. An active
thermal management system regulates the fast
charge constant current for all ambient tempera-
ture and input vs. output voltage conditions.
•
•
•
•
Input Voltage Range: 4.0V to 5.5V
Up to 1.5A Charging Current
Adapter Present Indicator (ADPP#)
High Level of Integration with Internal:
— Charging Device
— Reverse Blocking Diode
— Current Sensing
•
•
•
•
•
Active Thermal Loop Charge Reduction
Automatic Recharge Sequencing
Battery Temperature Monitoring
Full Battery Charge Auto Turn-Off / Sleep Mode
Over-Voltage, Over-Temperature, and
Emergency Thermal Protection
Power On Reset and Soft Start
Serial Interface Status Report
12-Pin 3x3mm TDFN Package
-40°C to +85°C Temperature Range
•
•
•
•
Battery temperature and charge state are fully
monitored for fault conditions. In the event of an
over-voltage or over-temperature failure, the
device will automatically shut down, thus protecting
the charging device, control system, and the bat-
tery under charge. Status monitor output pins are
provided to indicate the battery charge status by
directly driving two external LEDs. A serial interface
output is available to report 12 various charging
status states to a microcontroller.
Applications
•
•
•
•
•
•
Cellular Telephones
Digital Still Cameras
Hand Held PCs
The AAT3687 is available in a Pb-free, thermally-
enhanced, space-saving 12-pin TDFN 3x3mm
package and is rated over the -40°C to +85°C tem-
perature range.
MP3 Players
Personal Data Assistants (PDAs)
Other Lithium-Ion/Polymer Battery-Powered
Devices
Typical Application
BATT+
Adapter
ADPP#
Present
BAT
Enable
EN
COUT
10μF
+
DATA
Serial Interface
TS
CT
BATT-
AAT3687
CT
0.1μF
Adapter
ADP
GND
TEMP
ADPSET
STAT1
CIN
10μF
STAT2
RSET
Battery
Pack
RB1
RB2
LED1
LED2
3687.2006.06.1.5
1