AAT3688
USB Port Lithium-Ion/Polymer Battery Charger
™
BatteryManager
General Description
Features
The AAT3688 BatteryManager™ is a member of
AnalogicTech's Total Power Management IC™
(TPMIC™) product family. This device is a highly
integrated single cell lithium-ion/polymer battery
charger IC designed to operate with USB port
inputs. It requires the minimum number of external
components.
•
USB Charger
— Programmable up to 500mA Max
4.0V to 5.5V Input Voltage Range
High Level of Integration With Internal:
— Charging Device
— Reverse Blocking Diode
— Current Sensing
•
•
•
•
•
•
•
•
•
•
•
Automatic Recharge Sequencing
Charge Reduction Loop for USB Charging
Battery Temperature Monitoring
Full Battery Charge Auto Turn-Off
Over-Voltage Protection
Emergency Thermal Protection
Power On Reset and Soft Start
Serial Interface Status Reporting
12-Pin 3x3mm TDFN Package
The AAT3688 precisely regulates battery charge
voltage and current for 4.2V lithium-ion/polymer bat-
tery cells. Depending on the USB port type, the
AAT3688 charge current can be programmed for
two separate levels up to 500mA. An optional
Charge Reduction Loop is built in to allow users to
charge the battery with available current from a USB
port, while keeping the port voltage regulated.
Battery temperature and charge state are fully
monitored for fault conditions. In the event of an
over-voltage or over-temperature failure, the
device will automatically shut down, thus protecting
the charging device, control system, and the bat-
tery under charge. Status monitor output pins are
provided to indicate the battery charge status by
directly driving two external LEDs. A serial interface
output is available to report any one of 14 various
status states to a microcontroller.
Applications
•
•
•
•
•
•
•
Bluetooth™ Headsets
Cellular Telephones
Digital Still Cameras
Hand-Held PCs
MP3 Players
The AAT3688 is available in a Pb-free, thermally-
enhanced, space-saving 12-pin 3x3mm TDFN
package and is rated over the -40°C to +85°C tem-
perature range.
Personal Data Assistants (PDAs)
Other Lithium-Ion/Polymer Battery-Powered
Devices
Typical Application
Enable
USB
EN CHR
USB Input
USBSEL
USB Hi/Lo Select
BATT+
USBH
BAT
TS
C2
10μF
RSETH
USBL
AAT3688
RSETL
BATT-
GND
DATA
TEMP
STAT1
STAT2
Battery Pack
Serial Data
3688.2006.04.1.3
1