PRODUCT DATASHEET
AAT3693
TM
BatteryManager
1.6A Lithium-Ion/Polymer Battery Charger in 2.2x2.2TDFN
General Description
Features
•
•
•
•
The AAT3693 BatteryManager is a highly integrated sin-
gle-cell lithium-ion/polymer (Li-Ion) battery charger
which operates from a USB port, or an AC adapter input
up to 7.5V input voltage. The AAT3693 precisely regu-
lates battery charge voltage and current for 4.2V Li-Ion
battery cells. The battery charging current can be set by
an external resistor up to 1.6A. Digital Thermal Loop
Control maintains the maximum possible battery charg-
ing current for the given set of input to output power
dissipation and ambient temperature conditions.
USB or AC Adapter System Power Charger
Programmable from 100mA to 1.6A max
4.0V ~ 7.5V Input Voltage Range
High Level of Integration with Internal:
Charging Device
Reverse Blocking Diode
Current Sensing
▪
▪
▪
•
•
•
•
•
Digitized Thermal Regulation
Charge Current Programming (ISET)
Charge Termination Current Programming (TERM)
Charge Timer (CT)
Battery charge state is continuously monitored for fault
conditions. In the event of an over-current, over-voltage,
short-circuit, or over-temperature condition, the device
will shut down automatically, thus protecting the charg-
ing device, control system, and the battery under
charge. A status monitor output pin is provided to indi-
cate the battery charge status by directly driving an
external LED. An open-drain power source detection out-
put is provided to report the power supply status. With
the "No-Battery Detection" circuit integrated, the status
LEDs indicate that the battery is not present or not prop-
erly installed.
Battery Temperature Sensing (TS)
• No-Battery Detection
•
•
•
TS Pin Open Detection
Automatic Recharge Sequencing
Full Battery Charge Auto Turn Off/Sleep Mode/Charge
Termination
•
•
•
•
•
•
Shutdown Current < 6μA
Automatic Trickle Charge for Battery Preconditioning
Over-Voltage and Over-Current Protection
Emergency Thermal Protection
Power On Reset and Soft Start
2.2x2.2 TDFN Package
The AAT3693 is available in the Pb-free, thermally
enhanced, space-saving 2.2x2.2mm 10-pin TDFN pack-
ages and is specified for operation over the -40°C to
+85°C temperature range.
Applications
• Bluetooth™ Headsets
• Cell Phones
• Digital Still Cameras
• MP3 Players
• Personal Data Assistants (PDAs)
• Other Li-Ion Battery Powered Devices
Typical Application
VIN
BAT+
BAT
VIN
CBAT
AAT3693
STAT1
STAT2
ON/OFF
Temp
TS
EN
CT
Battery
Pack
TERM
ISET
RTERM
GND
CT
RSET
w w w . a n a l o g i c t e c h . c o m
3693.2009.04.1.1
1