PROPRIETARY INFORMATION NOTICE
0.050"±0.005"
This document and the designs, specifications, and engineering
information disclosed herein are the property of Parlex USA LLC,
and are not to be disseminated or reproduced without expressed
written consent. This document is loaned in confidence and then
only for consideration of the matter disclosed hereon. In accepting
loan of this document, the recipient agrees to keep it and the matter
disclosed hereon in confidence and not to use or permit their use in
any way detrimental to Parlex USA LLC.
TYP., NON-CUMULATIVE
25 FT. MINIMUM UNSPLICED
0.037"±0.010"
COND.#1
TINNED
CABLE
WIDTH
Non RoHS Part Numbering System
PS-1636-XX C
RoHS Part Numbering System
PSR1636-XX C
CHARACTER INDICATING REVISION
LEVEL OF SPECIFICATION DRAWING.
SPACE
CHARACTER INDICATING REVISION
LEVEL OF SPECIFICATION DRAWING.
SPACE
TWO DIGIT NUMBER INDICATING TOTAL
NUMBER OF CONDUCTORS.
TWO DIGIT NUMBER INDICATING TOTAL
NUMBER OF CONDUCTORS.
DASH
DASH
INDICATES DRAWING SPECIFICATION
FOR 1.27MM PITCH BULK CABLE
WITH PIN #1 DESIGNATED AS TINNED.
"R" INDICATES CABLE IS RoHS COMPLIANT
INDICATES DRAWING SPECIFICATION
FOR 1.27MM PITCH BULK CABLE
i.e. PS-1636-20 C
WITH PIN #1 DESIGNATED AS TINNED.
( INDICATES 20 POS. CABLE, 1.27MM PITCH ,
COND. #1 TINNED )
i.e. PSR1636-20 C
( INDICATES 20 POS. CABLE, 1.27MM PITCH,
COND. #1 TINNED, RoHS COMPLIANT )
1) BULK CABLE SPECIFICATION FOR 1.27MM PITCH
FLAT LAMINATED CABLE.
2) NUMBER OF CONDUCTORS AVAILABLE 1 THROUGH 99
3) CONDUCTOR NUMBER 1 IS DISTINGUISHED FROM REMAINING
CONDUCTORS BY TIN PLATING. IT IS VISIBLE, AS SUCH,
THROUGH POLYESTER INSULATION.
4) INSULATION: 0.002" THICK POLYESTER WITH FLAME RETARDANT
ADHESIVE.
A Johnson Electric Company
5) CONDUCTORS: 0.003" X 0.026" FLAT COPPER, POS. #1 IS TIN PLATED
(30 AWG EQUIVALENT)
6) U.L. RATING: AWM STYLE 2643, 105°C, VW-1, 300V
7) CURRENT RATING: 2.5A MAXIMUM
SPECIFICATION DRAWING FOR BULK
CABLE, 1.27MM PITCH, COND. #1 TINNED,
MATCHING STANDARD AMP REQUIREMENTS
FOR .050" CENTERLINE FFC
8) DIELECTRIC STRENGTH: 2500V/MIL
9) WHEN ORDERING, USE PART NUMBERING SYSTEM DESCRIBED
TO DETERMINE NUMBER OF CONDUCTORS REQUIRED
10) CABLE WIDTH= (NUMBER OF CONDUCTORS +1 ) X 0.050"
SIZE
B
FSCM
Rev.
PS-1636
C
1
18377
NA
SHEET
OF
1
SCALE