A6318A
LOW DROPOUT VOLTAGE REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
300mA LOW DROPOUT PROGRAMMABLE OUTPUT
DESCRIPTION
FEATURES
The A6318A series are highly precise, low noise,
positive voltage LDO regulators manufactured using
CMOS processes. The series achieves high ripple
rejection and low dropout and consists of a standard
voltage source, an error correction, current limiter
and a phase compensation circuit plus a driver
transistor. External output feedback, customers can
easily get the required voltage. In order to make the
load current does not exceed the current capacity of
the output transistor, built-in over-current protection,
over temperature protection and short circuit
protection.
programmable output: Minimum can go to 0.8V
Highly Accurate: ± 1.5%
Dropout Voltage: 300mV @ 100mA (3.0V type)
High Ripple Rejection: 50dB (10kHz)
Low Power Consumption: 30μA (TYP.)
Maximum Output Current : 300mA
(VIN≧VOUT+1V)
Standby Current : less than 0.1μA
Internal protector: current limiter ,short protector
and over temperature protection
Instructions with POWER GOOD
Available in SOT-25 Package
A6318A may have the POWER GOOD indicator.
When the FB voltage reaches 0.75V, PG output is
high. When the FB drops below 0.7V, PG output is
low. The internal op amp with advanced structure, the
output capacitor can be omitted!
APPLICATION
Mobile phones
Cordless phones
Cameras, Video cameras
Portable games
The A6318A is available in SOT-25 package.
Portable AV equipment
Reference voltage
Battery powered equipment
ORDERING INFORMATION
TYPICAL APPLICATION
Package Type
SOT-25
Part Number
A6318AE5R-ADJ
A6318AE5VR-ADJ
E5
V: Halogen free Package
R: Tape & Reel
Note
AiT provides all RoHS products
Suffix “ V “ means Halogen free Package
VOUT = 0.8 * (R1 + R2) /R2
REV1.2
- OCT 2013 RELEASED , FEB 2015 UPDATED-
- 1 -