A6011 / SMA6011
Cascadable Amplifier
2000 to 6000 MHz
Rev. V4
Features
Product Image
•
•
•
•
LOW NOISE FIGURE: 1.5 dB (TYP.)
MEDIUM OUTPUT POWER: +18 dBm (TYP.)
HIGH EFFICIENCY: 58 mA (TYP.) @ +5 Vdc
PHEMT AMPLIFIER
Description
The A6011 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance
and high reliability.
This single stage GaAs FET feedback amplifier design displays
impressive performance characteristics over a broadband
frequency range. An RF choke is used for DC power supply
decoupling.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
A6011
Package
TO-8
SMA6011
CA6011 **
Surface Mount
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50Ω, VCC = +5 VDC
Absolute Maximum Ratings
Parameter
Absolute
Typical
Guaranteed
0º to 50ºC -54º to +85ºC*
Maximum
-62ºC to +150ºC
125ºC
Parameter
Units
25ºC
1.5-6.0
14.8
Storage Temperature
Case Temperature
DC Voltage
Frequency
GHz
dB
2.0-6.0
13.5
2.0-6.0
12.5
+7 V
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Continuous Input Power
+13 dBm
dB
±0.6
±0.9
±1.1
Short Term Input power
(1 minute max.)
100 mW
0.25 W
125ºC
dB
16
Peak Power (3 µsec max.)
Noise Figure (max)
dB
1.5
2.5
3.0
“S” Series Burn-In
Temperature (case)
Power Output
@ 1 dB comp. (min)
dBm
18.0
16.5
16.0
Thermal Data: VCC = +5 VDC
IP3
dBm
dBm
dBm
+30
+45
+50
Parameter
Rating
IP2
Thermal Resistance θjc
47ºC/W
0.2 W
Second Order Harmonic IP
VSWR Input / Output (max)
DC Current @ 5 Volts (max)
Transistor Power Dissipation Pd
1.9:1 / 1.9:1 2.1:1 / 2.1:1
58 65
2.2:1 / 2.2:1
70
Junction Temperature Rise
Above Case Tjc
+9.4ºC
mA
* Over temperature performance limits for part number CA6011, guaranteed from 0oC to +50oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.