3515 AND
3516
RATIOMETRIC, LINEAR HALL-EFFECT SENSORS
FOR HIGH-TEMPERATURE OPERATION
The A3515– and A3516– are sensitive, temperature-stable linear Hall-
effect sensors with greatly improved offset characteristics. Ratiometric, linear
Hall-effect sensors provide a voltage output that is proportional to the applied
magnetic field and have a quiescent output voltage that is approximately 50%
of the supply voltage. These magnetic sensors are ideal for use in linear and
rotary position sensing systems in the harsh environments of automotive and
industrial applications over extended temperatures to -40°C and +150°C. The
A3515– features an output sensitivity of 5 mV/G, while the A3516– has an
output sensitivity of 2.5 mV/G. See the Magnetic Characteristics table for
complete, individual device parametrics.
V
CC
Each BiCMOS monolithic circuit integrates a Hall element, improved
temperature-compensating circuitry to reduce the intrinsic sensitivity drift of
1
2
3
the Hall element, a small-signal high-gain amplifier, and a rail-to-rail low-
impedance output stage.
A proprietary dynamic offset cancelation technique, with an internal
high-frequency clock, reduces the residual offset voltage, which is normally
caused by device overmolding, temperature dependancies, and thermal stress.
This technique produces devices that have an extremely stable quiescent
output voltage, are immune to mechanical stress, and have precise recover-
ability after temperature cycling. Many problems normally associated with
low-level analog signals are minimized by having the Hall element and
amplifier in a single chip. Output precision is obtained by internal gain and
offset trim adjustments during the manufacturing process.
Dwg. PH-006
Pinning is shown viewed from branded side.
These devices are supplied in a 3-pin ultra-mini-SIP ‘UA’ package.
FEATURES
ABSOLUTE MAXIMUM RATINGS
■ Temperature-Stable Quiescent Output Voltage
■ Precise Recoverability After Temperature Cycling
■ Output Voltage Proportional to Applied Magnetic Field
■ Ratiometric Rail-to-Rail Output
■ Improved Sensitivity
Supply Voltage, VCC .............................. 8.0 V
Output Voltage, VO ................................ 8.0 V
Output Sink Current, IO ....................... 10 mA
Magnetic Flux Density, B.............. Unlimited
Package Power Dissipation,
■ 4.5 V to 5.5 V Operation
PD ........................................... See Graph
Operating Temperature Range*, TA
■ Immune to Mechanical Stress
■ Small Package Size
Suffix ‘E–’ ..................... -40°C to +85°C
Suffix ‘L–’ .................... -40°C to +150°C
Storage Temperature Range,
■ Solid-State Reliability
TS .................................. -65°C to +170°C
* Infrequent excursions permitted; see
Applications Information.
Always order by complete part number, e.g., A3515LUA .