L67132/L67142
2 K × 8 CMOS Dual Port RAM 3.3 Volt
Introduction
The L67132/67142 are very low power CMOS dual port Using an array of eight transistors (8T) memory cell and
static RAMs organized as 2048 × 8. They are designed to fabricated with the state of the art 1.0 µm lithography
be used as a stand-alone 8 bit dual port RAM or as a named SCMOS, the L67132/67142 combine an
combination MASTER/SLAVE dual port for 16 bits or extremely low standby supply current (typ = 1.0 µA) with
more width systems. The MHS MASTER/SLAVE dual a fast access time at 45 ns over the full temperature range.
port approach in memory system applications results in All versions offer battery backup data retention capability
full speed, error free operation without the need for with a typical power consumption at less than 5 µW.
additional discrete logic.
For military/space applications that demand superior
Master and slave devices provide two independent ports
with separate control, address and I/O pins that permit
independent, asynchronous access for reads and writes to
any location in the memory. An automatic power down
feature controlled by CS permits the onchip circuitry of
each port in order to enter a very low stand by power
mode.
levels of performance and reliability the L67132/67142
is processed according to the methods of the latest
revision of the MIL STD 883 (class B or S) and/or ESA
SCC 9000.
Features
D Single 3.3 V ± 0.3 volt power supply
D Fast access time
D On chip arbitration logic
D BUSY output flag on master
D BUSY input flag on slave
D Fully asynchronous operation from either port
D Battery backup operation :
2 V data retention
45(*) ns to 70 ns
D 67132L/67142L low power
67132V/67142V very low power
D Expandable data bus to 16 bits or more using master/slave
devices when using more than one device
(*) Preliminary
MATRA MHS
1
Rev. D (19 Fev. 97)