A1308 and A1309
Linear Hall-Effect Sensor ICs with Analog Output
Available in a Miniature, Low-Profile Surface-Mount Package
FEATURES AND BENEFITS
DESCRIPTION
• 5 V supply operation
New applications for linear output Hall-effect sensors, such
as displacement and angular position, require higher accuracy
and smaller package sizes. The Allegro A1308 and A1309
linear Hall-effect sensor ICs have been designed specifically
to meet both requirements. These temperature-stable devices
areavailableinbothsurface-mountandthrough-holepackages.
• QVO temperature coefficient programmed at Allegro™ for
improved accuracy
• Miniature package options
• High-bandwidth, low-noise analog output
• High-speed chopping scheme minimizes QVO drift across
operating temperature range
• Temperature-stable quiescent voltage output and sensitivity
• Precise recoverability after temperature cycling
• Output voltage clamps provide short-circuit diagnostic
capabilities
The accuracy of each device is enhanced via end-of-line
optimization. Each device features nonvolatile memory to
optimize device sensitivity and the quiescent voltage output
(QVO: output in the absence of a magnetic field) for a given
application or circuit. This A1308 and A1309 optimized
performance is sustained across the full operating temperature
range by programming the temperature coefficient for both
sensitivity and QVO at Allegro end-of-line test.
• Undervoltage lockout (UVLO)
• Wide ambient temperature range:
–40°C to 150°C (SOT-23W), –40°C to 125°C (SIP)
• Immune to mechanical stress
• Enhanced EMC performance for stringent automotive
applications
These ratiometric Hall-effect sensor ICs provide a voltage
output that is proportional to the applied magnetic field. The
quiescent voltage output is adjusted around 50% of the supply
voltage.
3-pin ultramini SIP
PACKAGES:
1.5 mm × 4 mm × 3 mm
3-pin SOT-23W
2 mm × 3 mm × 1 mm
(suffix LH)
(suffix UA)
The features of these linear devices make them ideal for use in
automotiveandindustrialapplicationsrequiringhighaccuracy,
and they operate across an extended temperature range,
–40°C to 150°C (SOT-23W) or –40°C to 125°C (SIP).
Each BiCMOS monolithic circuit integrates a Hall element,
temperature-compensating circuitry to reduce the intrinsic
Continued on the next page…
Not to scale
Functional Block Diagram
V+
VCC
VOUT
Sensitivity and
Sensitivity TC
Offset and
Offset TC
CBYPASS
GND
A1308-9-DS, Rev. 7
January 4, 2017