Datasheet > 853S111AYILFT

853S111AYILFT

更新时间： 2024-02-05 06:20:07

品牌	Logo	应用领域
艾迪悌 - IDT		/
页数	文件大小	规格书
20页	298K
描述
Differential-to-LVPECL/ECL Fanout Buffer

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

853S111AYILFT 数据手册

853S111AI DATA SHEET

Additive Phase Jitter

The spectral purity in a band at a specific offset from the fundamental

compared to the power of the fundamental is called the dBc Phase

Noise. This value is normally expressed using a Phase noise plot and

is most often the specified plot in many applications. Phase noise is

defined as the ratio of the noise power present in a 1Hz band at a

specified offset from the fundamental frequency to the power value of

the fundamental. This ratio is expressed in decibels (dBm) or a ratio

of the power in the 1Hz band to the power in the fundamental. When

the required offset is specified, the phase noise is called a dBc value,

which simply means dBm at a specified offset from the fundamental.

By investigating jitter in the frequency domain, we get a better

understanding of its effects on the desired application over the entire

time record of the signal. It is mathematically possible to calculate an

expected bit error rate given a phase noise plot.

Additive Phase Jitter @ 155.52MHz

12kHz to 20MHz = 0.07ps (typical)

Offset from Carrier Frequency (Hz)

As with most timing specifications, phase noise measurements has

issues relating to the limitations of the equipment. Often the noise

floor of the equipment is higher than the noise floor of the device. This

is illustrated above. The device meets the noise floor of what is

shown, but can actually be lower. The phase noise is dependent on

the input source and measurement equipment.

The source generator "Rhode & Schwartz SMA 100A Signal

Generator 9kHz – 6GHz as external input to a Hewlett Packard 8133A

3GHz Pulse Generator".

LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-LVPECL/ECL FANOUT

BUFFER

Rev A 6/30/15

1...4 5 678 9 10...20

下载PDF

型号	品牌	描述	获取价格	数据表
853S111B	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格
853S111B_16	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格
853S111B_17	IDT	Low Skew Different ial-to-2 .5V, 3.3V LVPECL/ECL	获取价格
853S111BI	RENESAS	Low Skew, 1-to-10 Differential-to-2.5V, 3.3V LVPECL / ECL Fanout Buffer	获取价格
853S111BKILF	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格
853S111BKILF/W	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格