是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Obsolete | 零件包装代码: | SSOP2 |
包装说明: | SSOP, | 针数: | 16 |
Reach Compliance Code: | unknown | HTS代码: | 8542.39.00.01 |
风险等级: | 5.21 | 其他特性: | CLOCK INHIBIT |
计数方向: | RIGHT | 系列: | HCT |
JESD-30 代码: | R-PDSO-G16 | JESD-609代码: | e4 |
长度: | 6.2 mm | 负载电容(CL): | 50 pF |
逻辑集成电路类型: | PARALLEL IN SERIAL OUT | 湿度敏感等级: | 1 |
位数: | 8 | 功能数量: | 1 |
端子数量: | 16 | 最高工作温度: | 125 °C |
最低工作温度: | -40 °C | 输出极性: | TRUE |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | SSOP |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE, SHRINK PITCH |
峰值回流温度(摄氏度): | 260 | 传播延迟(tpd): | 60 ns |
认证状态: | Not Qualified | 座面最大高度: | 2 mm |
最大供电电压 (Vsup): | 5.5 V | 最小供电电压 (Vsup): | 4.5 V |
标称供电电压 (Vsup): | 5 V | 表面贴装: | YES |
技术: | CMOS | 温度等级: | AUTOMOTIVE |
端子面层: | NICKEL PALLADIUM GOLD | 端子形式: | GULL WING |
端子节距: | 0.65 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | 30 | 触发器类型: | POSITIVE EDGE |
宽度: | 5.3 mm | 最小 fmax: | 17 MHz |
Base Number Matches: | 1 |
型号 | 品牌 | 替代类型 | 描述 | 数据表 |
74HCT166D,653 | NXP |
类似代替 |
74HC(T)166 - 8-bit parallel-in/serial-out shift register SOP 16-Pin | |
74HCT166D,652 | NXP |
类似代替 |
74HC(T)166 - 8-bit parallel-in/serial-out shift register SOP 16-Pin |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
74HCT166D-Q100 | NEXPERIA |
获取价格 |
8-bit parallel-in/serial out shift registerProduction | |
74HCT166N | NXP |
获取价格 |
8-bit parallel-in/serial-out shift register | |
74HCT166N | PHILIPS |
获取价格 |
Shift Register, 8-Bit, CMOS, PDIP16, | |
74HCT166N,652 | NXP |
获取价格 |
74HCT166N | |
74HCT166N-B | PHILIPS |
获取价格 |
Shift Register, 8-Bit, CMOS, PDIP16 | |
74HCT166PW | NXP |
获取价格 |
8-bit parallel-in/serial-out shift register | |
74HCT166PW | NEXPERIA |
获取价格 |
8-bit parallel-in/serial out shift registerProduction | |
74HCT166PW-T | NXP |
获取价格 |
IC HCT SERIES, 8-BIT RIGHT PARALLEL IN SERIAL OUT SHIFT REGISTER, TRUE OUTPUT, PDSO16, PLA | |
74HCT173 | NXP |
获取价格 |
Quad D-type flip-flop; positive-edge trigger; 3-state | |
74HCT173D | NXP |
获取价格 |
IC HCT SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO16, SOT-109, SO-16, F |