Datasheet > 逻辑 > 计数器> 74HC193DB-T

74HC193DB-T

更新时间： 2024-11-19 13:04:55

品牌	Logo	应用领域
恩智浦 - NXP		计数器
页数	文件大小	规格书
30页	184K
描述
IC HC/UH SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDSO16, SOT-338-1, SSOP-16, Counter

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

74HC193DB-T 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Transferred	零件包装代码：	SOIC
包装说明：	SSOP,	针数：	16
Reach Compliance Code：	unknown	HTS代码：	8542.39.00.01
风险等级：	5.18	Is Samacsys：	N
其他特性：	TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK	计数方向：	BIDIRECTIONAL
系列：	HC/UH	JESD-30 代码：	R-PDSO-G16
JESD-609代码：	e4	长度：	6.2 mm
负载电容（CL）：	50 pF	负载/预设输入：	YES
逻辑集成电路类型：	BINARY COUNTER	工作模式：	SYNCHRONOUS
湿度敏感等级：	1	位数：	4
功能数量：	1	端子数量：	16
最高工作温度：	125 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	SSOP
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, SHRINK PITCH
峰值回流温度（摄氏度）：	260	传播延迟（tpd）：	65 ns
认证状态：	Not Qualified	座面最大高度：	2 mm
最大供电电压 (Vsup)：	6 V	最小供电电压 (Vsup)：	2 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	CMOS	温度等级：	AUTOMOTIVE
端子面层：	NICKEL PALLADIUM GOLD	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	30	触发器类型：	POSITIVE EDGE
宽度：	5.3 mm	最小 fmax：	13 MHz
Base Number Matches：	1

74HC193DB-T 数据手册

74HC193; 74HCT193

Presettable synchronous 4-bit binary up/down counter

Rev. 4 — 24 June 2013

Product data sheet

1. General description

The 74HC193; 74HCT193 is a 4-bit synchronous binary up/down counter. Separate

up/down clocks, CPU and CPD respectively, simplify operation. The outputs change state

synchronously with the LOW-to-HIGH transition of either clock input. If the CPU clock is

pulsed while CPD is held HIGH, the device will count up. If the CPD clock is pulsed while

CPU is held HIGH, the device will count down. Only one clock input can be held HIGH at

any time to guarantee predictable behaviour. The device can be cleared at any time by the

asynchronous master reset input (MR); it may also be loaded in parallel by activating the

asynchronous parallel load input (PL). The terminal count up (TCU) and terminal count

down (TCD) outputs are normally HIGH. When the circuit has reached the maximum

count state of 15, the next HIGH-to-LOW transition of CPU will cause TCU to go LOW.

TCU will stay LOW until CPU goes HIGH again, duplicating the count up clock. Likewise,

the TCD output will go LOW when the circuit is in the zero state and the CPD goes LOW.

The terminal count outputs can be used as the clock input signals to the next higher order

circuit in a multistage counter, since they duplicate the clock waveforms. Multistage

counters will not be fully synchronous, since there is a slight delay time difference added

for each stage that is added. The counter may be preset by the asynchronous parallel

load capability of the circuit. Information present on the parallel data inputs (D0 to D3) is

loaded into the counter and appears on the outputs (Q0 to Q3) regardless of the

conditions of the clock inputs when the parallel load (PL) input is LOW. A HIGH level on

the master reset (MR) input will disable the parallel load gates, override both clock inputs

and set all outputs (Q0 to Q3) LOW. If one of the clock inputs is LOW during and after a

reset or load operation, the next LOW-to-HIGH transition of that clock will be interpreted

as a legitimate signal and will be counted. Inputs include clamp diodes. This enables the

use of current limiting resistors to interface inputs to voltages in excess of V_CC

2. Features and benefits

 Input levels:

 For 74HC193: CMOS level

 For 74HCT193: TTL level

 Synchronous reversible 4-bit binary counting

 Asynchronous parallel load

 Asynchronous reset

 Expandable without external logic

 Complies with JEDEC standard no. 7A

 ESD protection:

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V.

12 3 4 5 6 7...30

中文翻译

下载PDF

与74HC193DB-T相关器件

型号	品牌	获取价格	描述	数据表
74HC193D-Q100	NEXPERIA	获取价格	Presettable synchronous 4-bit binary up/down counter
74HC193D-Q100J	NXP	获取价格	74HC(T)193-Q100 - Presettable synchronous 4-bit binary up/down counter SOP 16-Pin
74HC193D-T	NXP	获取价格	IC HC/UH SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDSO16, 3
74HC193N	NXP	获取价格	Presettable synchronous 4-bit binary up/down counter
74HC193N,652	NXP	获取价格	74HC(T)193 - Presettable synchronous 4-bit binary up, down counter DIP 16-Pin
74HC193NB	NXP	获取价格	HC/UH SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDIP16
74HC193PW	NXP	获取价格	Presettable synchronous 4-bit binary up/down counter
74HC193PW	NEXPERIA	获取价格	Presettable synchronous 4-bit binary up/down counterProduction
74HC193PW,118	NXP	获取价格	74HC(T)193 - Presettable synchronous 4-bit binary up, down counter TSSOP 16-Pin
74HC193PW-Q100	NXP	获取价格	IC BINARY COUNTER, Counter

与74HC193DB-T相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

23
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

15
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

45
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

45

产品中心

服务支持

精选活动

关于我们

帮助中心

74HC193DB-T

74HC193DB-T 技术参数

74HC193DB-T 数据手册

与74HC193DB-T相关器件

与74HC193DB-T相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

74HC193DB-T

74HC193DB-T 技术参数

74HC193DB-T 数据手册

与74HC193DB-T相关器件

与74HC193DB-T相关文章

您还可以找

您在本页遇到什么问题？