750-102 750-103 and 750-115
Connector to Connector Pre-Terminated Assemblies
Series 72 & 74 Tubing & Series 75 Conduit
FORCONNECTOR-TO-CONNECTORAPPLICATIONS
CONNECTORDESIGNATORS(A-B-D-E-F-G-H-J-K-L-S)
750 N A 102 M F20 1 A16 2-24-36
Product Series
720 = Series 72
Length in inches *
Conduit Dash No. **
Style 1 or 2
740 = Series 74 ***
750 = Series 75
Jacket
H = With Hypalon Jacket
V = With Viton Jacket
N = With Neoprene Jacket
X = No Jacket
Adapter B:
Conn. Shell Size (For conn. des. B add
conn. mfr. symbol from Page F-13, e.g. 24H
if mating to an Amphenol connector)
E = EPDM
Style 1 or 2 (Style 2 not available with N or T)
Conduit Type
Adapter A:
Adapter Material
102 = Aluminum
103 = Brass
Conn. Shell Size (For conn. des. B add
conn. mfr. symbol from Page F-13, e.g. 20H
if mating to an Amphenol connector)
115 = Stainless Steel
Finish(TableI)
TABLEI
SYMBOL FINISH
B
J
Olive Drab over Cadmium Plate
Gold Iridite over Cadmium Plate over Nickel
M
Electroless Nickel
N
Olive Drab over Cadmium Plate over Nickel
Zinc-Cobalt, Olive Drab
NC
NF
Olive Drab over Cadmium Plate over
Electroless Nickel (500 Hour Salt Spray)
T
Bright Dip Cadmium Plate over Nickel
Passivate
Z1
LENGTH*
1.69
(42.9)
MAX.
REF.
O-RING
ATHREAD
(Page F-17)
C OR D DIA
(Page F-17)
ADAPTER B
ADAPTER A
Metric dimensions (mm) are indicated in parentheses.
*
Length tolerance is ± .250 (12.7) for lengths up to 24 inches (619.6 mm). Length tolerance for longer lengths is ± one percent (1%) of the
length.
** Consult factory for fittings using 3.000" (76.2) conduit.
*** Pre-terminated assemblies using product Series 74 will be supplied with FEP material, standard wall thickness, standard convolutions, tin/
copper braid, and neoprene jacket. For other options consult factory.
© 2003 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
B-6