MODEL: 61D
Field Network Modules 61-UNIT Series
[4] OPTIONS
blank: none
/Q: With options (specify the specification)
ANALOG I/O MODULE
(DeviceNet)
Functions & Features
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Interfacing analog I/O signals from/to Mini-M, Pico-M and
other signal conditioner modules with DeviceNet
• Saving power and I/O wiring inside an instrumentation
panel
/C02: Polyurethane coating
/C03: Rubber coating
50
(1.97)
RELATED PRODUCTS
• Installation Base (model: M2BS2)
• Installation Base (model: M8BS2)
• Programming Unit (model: PU-2x)
100
(3.94)
GENERAL SPECIFICATIONS
Construction: Plug-in
115
(4.53)
mm (inch)
Connection
DeviceNet: Euro type connector terminal (applicable
wire size: 0.2 to 2.5 mm , stripped length 7 mm)
2
I/O: Via the Installation Base (model: MxBS2)
Power input: Via the Installation Base (model: MxBS2)
Housing material: Flame-resistant resin (black)
Isolation: I/O to DeviceNet to power
MODEL: 61D-[1][2]-[3][4]
ORDERING INFORMATION
• Code number: 61D-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. 61D-161-K/Q)
Power indicator: Green LED turns on with power supplied.
DeviceNet COMMUNICATION
Transmission cable: Approved for DeviceNet
Node address setting: DIP switch; 00 – 63
Baud rate setting: DIP switch
• Specify the specification for option code /Q
(e.g. /C01)
[1] NO. OF CHANNELS
04: 4 points
MS (Module Status) indicator: Bi-color (green/red) LED
indicates device status.
08: 8 points
NS (Network Status) indicator: Bi-color (green/red)
LED indicates status of the communication link.
16: 16 points
[2] I/O TYPE
1: Input
INPUT SPECIFICATIONS
■ Analog Input
2: Output
Input range: 1 – 5 V DC
Input resistance: ≥ 1 MΩ
(Each input must be isolated by signal conditioners. Non-
isolated modules such as M2BW and M8BW are not usable.)
A/D conversion
[3] POWER INPUT
AC Power
K: 85 – 132 V AC
Moving averaging: 4 samples
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
(CE not available)
Sampling rate: 160 ms
A/D conversion output: 16-bit binary
Signal range 0 – 100 % is converted into hexadecimal 0000
– 1770 (0 – 6000). -15 to 0 % is represented by 2’s
complements.
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
(Specify power suffix code R (24 V DC) when the UNIT is to be
combined with the M8BS2.)
Overall range is represented by hexadecimal FC7C – 1AF4
(-900 – +6900), for -15 – +115 %.
61D SPECIFICATIONS
ES-6629 Rev.14 Page 1/4
https://www.m-system.co.jp/
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
