MLCC ARRAYS
项目
Item
技术规格
Technical Specification
测 试 方 法
Test Method and Remarks
±2%或±1pF,取两者之中较大者
±2% or ±1pF, whichever is larger.
C0G
电压:2 倍额定工作电压
ΔC
时间:1000 小时
/C
温度:125℃(NPO、X7R) 85℃(Y5V)
充电电流:不应超过 50mA
X7R
Y5V
-20% ~ +20%
-30% ~ +30%
放置条件:室温
≤2 倍初始标准
Not more than twice of initial value.
Ri≥4000MΩ或 Ri•CR≥40S 取两者之中较小者
放置时间:24 小时(Ⅰ类),或 48 小时(Ⅱ类),
DF
IR
寿命试验
Life Test
Applied Voltage: 2*Ur,except the table 1
Duration: 1000h
Temperature: 125 ℃(NPO、X7R) 85℃(Y5V)
Charge/ Discharge Current: 50mA max.
Recovery Conditions: Room Temperature
Recovery Time: 24h (Class 1), or 48h (Class2)
C0G
Ri≥4000MΩ or Ri•CR≥40S
whichever is smaller.
Ri≥2000MΩ或 Ri•CR≥50S 取两者之中较小者.
X7R
Ri≥2000MΩ or Ri•CR≥50S
whichever is smaller.
外观:无损伤
Appearance: No visible damage.
专门预处理※(仅对 2 类电容器):
将电容器放在上限类别温度或按详细规范中可能规定的更高温度下经 1h 后,接着在试验的标准大气条件下恢复 24±1h。
Note:Pretreatment (only for class2 capacitor)
Pretreatment (only for class2 capacitor) is a method to treat the capacitor before measurement. First, place the capacitor in the
up-category temperature or other specified higher temperature environment for 1hour. Then recovery the capacitor at standard
pressure conditions for 24±1hours。
◆ 包装
Package
* 纸带卷盘结构
Paper Taping
Top cover tape 面胶
Carrier tape(paper)传送带
Chip hole(Pocket) 芯片孔
Polystyrene reel 胶盘
Bottom tape 底胶
* 适合‘6124,5084,5082’尺寸产品的纸带尺寸
Dimensions of paper taping for 6124,5084,5082 types