Datasheet > 60001-011

60001-011

更新时间： 2024-11-24 00:54:55

品牌	Logo	应用领域
其他 - ETC		/
页数	文件大小	规格书
5页	281K
描述
The optical isolator can accommodate standard operating voltages from 5 to 28 VDC

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

60001-011 数据手册

ELECTRICAL SPECIFICATIONS

OPTICAL ISOLATOR

POWER:

The optical isolator can accommodate standard operating

voltages from 5 to 28 VDC. It should never be connected

directly to AC power mains. The module draws approximately

75 mA and a green LED indicates the unit is powered. The

optical isolator module does not provide power to the encoder.

Any encoders used in conjunction with this module must be

connected to their own power.

ELECTRONIC MODULE

SIGNAL:

Specifying an optical isolator module requires knowledge of

three system parameters: the DC supply voltage available in the

system; the encoder output type (logic levels and driver type);

and the input signal specifications of the receiving electronics.

MECHANICAL SPECIFICATIONS

Package dimensions are 114.4 mm high by 99 mm wide by 22.5

mm thick. The package mounts to a DIN rail type EN 50 022

(35mm X 7.5mm). A length of DIN rail is supplied with each

module. The module simply snaps directly to the DIN rail and is

ready to use.

22.5 mm

This is a versatile interface between an incremental

encoder and receiving electronics. It accepts single

ended or differential inputs and provides single ended or

differential outputs in either an open collector or line

driver configuration. It accommodates all standard

operating voltages from 5 to 28 VDC. Up to eight Optical

Isolator Modules can be daisy-chained to provide

multiple, simultaneous outputs to controllers or PLC’s.

This Optical Isolator can help clean up noisy signals by

converting to a different line driver output. It has a 1

MHz throughput capability and can be used wherever a

fast, optically isolated interface is required.

114.5 mm

(0.89 inches)

(4.51 inches)

99 mm

Output Code Format

From Encoder

Dual Channel in quadrature plus index and complements. Data lines are designated A, B, Z, A/, B/, Z/ at the

module

Differential line driver (Use Connection Instructions #1)

Single ended line driver (Use Connection Instructions #2)

Output Signal Type

From Encoder

Single ended open collector with pull-up resistors internal to encoder (Use Connection Instructions #3)

Single ended, open collector (Use Connection Instructions #3)

Output Signal

Voltage Level From

Encoder

5 VDC (TTL, RS422 compatible, line driver)

12-15 VDC

24VDC

Frequency Response

of Optical Isolator

1 MHz, maximum

Power Requirements

For Optical Isolator

5-28 VDC ±5%, 75mA plus load current

28V/V Line Driver, 100mA source/sink, Vout = Vin

28V/5 Line Driver, 100mA source/sink, Vout = 5V (Derate output current to 50mA with supply voltage > 12VDC)

28V/OC NPN Open Collector, 80mA sink

Optical Isolator

Output Options

Protection Level

Tristate Outputs

Supply lines protected against over voltage to 60 volts and reverse voltage

Available as –S Special Feature

Tel: 805-968-0782/800-350-2727 | Fax: 805-968-3154/ 800-960-2726 | 7230 Hollister Ave, Goleta, CA

93117-2807| www.beisensors.com

Specification No. 02125-001 Rev 0713

12 3 4 5

中文翻译

下载PDF

与60001-011相关器件

型号	品牌	获取价格	描述	数据表
60001-012	ETC	获取价格	The optical isolator can accommodate standard operating voltages from 5 to 28 VDC
60001-013	ETC	获取价格	The optical isolator can accommodate standard operating voltages from 5 to 28 VDC
60001-014	ETC	获取价格	The optical isolator can accommodate standard operating voltages from 5 to 28 VDC
6000-101K-RC	BOURNS	获取价格	Radial Lead RF Chokes
6000-102K-RC	BOURNS	获取价格	Radial Lead RF Chokes
6000-103K-RC	BOURNS	获取价格	Radial Lead RF Chokes
60001-1011A	AMPHENOL	获取价格	Board Connector, 44 Contact(s), 4 Row(s), Male, Straight, Solder Terminal,
60001-1011J	AMPHENOL	获取价格	Board Connector, 44 Contact(s), 4 Row(s), Male, Straight, Solder Terminal,
60001-1012J	AMPHENOL	获取价格	Board Connector, 48 Contact(s), 4 Row(s), Male, Straight, Solder Terminal
60001-1013A	AMPHENOL	获取价格	Board Connector, 52 Contact(s), 4 Row(s), Male, Straight, Solder Terminal

与60001-011相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

36
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

28
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

56
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

53

产品中心

服务支持

精选活动

关于我们

帮助中心

60001-011

60001-011 数据手册

与60001-011相关器件

与60001-011相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

60001-011

60001-011 数据手册

与60001-011相关器件

与60001-011相关文章

您还可以找

您在本页遇到什么问题？