5秒后页面跳转
5KP85ATR PDF预览

5KP85ATR

更新时间: 2024-11-14 20:09:23
品牌 Logo 应用领域
美高森美 - MICROSEMI 局域网二极管电视
页数 文件大小 规格书
4页 196K
描述
5000W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AR, PLASTIC, CASE 5A, 2 PIN

5KP85ATR 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:DO-204包装说明:O-PALF-W2
针数:2Reach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8541.10.00.50
风险等级:5.12最大击穿电压:104 V
最小击穿电压:94.4 V击穿电压标称值:99.2 V
外壳连接:ISOLATED最大钳位电压:137 V
配置:SINGLE二极管元件材料:SILICON
二极管类型:TRANS VOLTAGE SUPPRESSOR DIODEJEDEC-95代码:DO-204AR
JESD-30 代码:O-PALF-W2JESD-609代码:e0
湿度敏感等级:1最大非重复峰值反向功率耗散:5000 W
元件数量:1端子数量:2
封装主体材料:PLASTIC/EPOXY封装形状:ROUND
封装形式:LONG FORM峰值回流温度(摄氏度):NOT SPECIFIED
极性:UNIDIRECTIONAL最大功率耗散:1.56 W
认证状态:Not Qualified最大重复峰值反向电压:85 V
子类别:Transient Suppressors表面贴装:NO
技术:AVALANCHE端子面层:TIN LEAD
端子形式:WIRE端子位置:AXIAL
处于峰值回流温度下的最长时间:NOT SPECIFIEDBase Number Matches:1

5KP85ATR 数据手册

 浏览型号5KP85ATR的Datasheet PDF文件第2页浏览型号5KP85ATR的Datasheet PDF文件第3页浏览型号5KP85ATR的Datasheet PDF文件第4页 
5KP5.0 thru 5KP110A  
5000 W TRANSIENT VOLTAGE  
SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
These Microsemi 5 kW Transient Voltage Suppressors (TVSs) are designed  
for applications requiring protection of voltage-sensitive electronic devices  
that may be damaged by harsh or severe voltage transients including  
lightning per IEC61000-4-5 and classes with various source impedances  
described herein. This series is available in 5.0 to 110 volt standoff voltages  
(VWM) in both unidirectional and bidirectional offered in two different package  
designs for axial and radial configurations. Microsemi also offers numerous  
other TVS products to meet higher and lower power demands and special  
applications.  
CASE 5A  
(DO-204AR)  
CASE  
5R  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
Available in both Unidirectional and Bidirectional  
Protection from switching transients and induced RF  
construction (Bidirectional with C or CA suffix)  
Protection from ESD, and EFT per IEC 61000-4-2  
Available in both axial-leaded and radial packages  
(include R prefix in part number for radial package  
option shown in figure as “case 5R,” ie . R5KP5.0A,  
R5KP28CA, 5KP110, etc.)  
and IEC 61000-4-4  
Secondary lightning protection per IEC61000-4-5  
with 42 Ohms source impedance:  
Class 1,2,3,4: 5KP5.0A to 5KP110A or CA  
Selections for 5.0 to 110 volts standoff voltages (VWM)  
Class 5: 5KP5.0A to 5KP110A or CA (short distance)  
Suppresses transients up to 5000 watts @ 10/1000 µs  
Class 5: 5KP5.0A to 5KP36A or CA (long distance)  
and 34,000 watts @ 8/20 µs (see Figure 1)  
Secondary lightning protection per IEC61000-4-5  
Fast response  
with 12 Ohms source impedance:  
Options for screening in accordance with MIL-PRF-  
19500 for JAN, JANTX, JANTXV, and JANS are  
available by adding MQ, MX, MV, or MSP prefixes  
respectively to part numbers.  
Class 1 & 2: 5KP5.0A to 5KP110A or CA  
Class 3: 5KP5.0A to 5KP78A or CA  
Class 4: 5KP5.0A to 5KP40A or CA  
Secondary lightning protection per IEC61000-4-5  
Moisture classification is Level 1 with no dry pack  
with 2 Ohms source impedance:  
required per IPC/JEDEC J-STD-020B  
Class 2: 5KP5.0A to 5KP70A or CA  
Class 3: 5KP5.0 to 5KP36A or CA  
Class 4: 5KP5.0 to 5KP18A or CA  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
Peak Pulse Power dissipation at 25ºC: 5000 watts at  
CASE: Void-free transfer molded thermosetting  
10/1000 µs (also see Figures 1, 2 and 3)  
Impulse repetition rate (duty factor): 0.05%  
epoxy body meeting UL94V-0  
TERMINALS: Tin-Lead plated readily solderable  
per MIL-STD-750, method 2026  
MARKING: Body marked with part number  
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for  
unidirectional and < 5 ns for bidirectional  
Operating and Storage temperature: -65ºC to +150ºC  
POLARITY: Band denotes cathode. Bidirectional  
Thermal resistance: 20ºC/W junction to lead, or  
80ºC/W junction to ambient when mounted on FR4 PC  
board with 4 mm2 copper pads (1oz) and track width 1  
mm, length 25 mm  
not marked for polarity  
WEIGHT: 1.5 grams.  
TAPE & Reel: Standard per EIA-296 for axial  
package (add “TR” suffix to part number)  
Steady-State Power dissipation: 6 watts at TL = 30oC,  
or 1.56 watts at TA = 25ºC when mounted on FR4 PC  
board described for thermal resistance  
See package dimensions on last page  
Forward Surge Voltage: 3.5 V maximum @ 100 Amps  
8.3 ms half-sine wave  
Solder temperatures: 260 ºC for 10 s (maximum)  
Copyright 2002  
6-09-2003 REV A  
Microsemi  
Page 1  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

与5KP85ATR相关器件

型号 品牌 获取价格 描述 数据表
5KP85AV RECTRON

获取价格

Package / Case : R-6;Mounting Style : Through Hole;Power Rating : 5000 W;Polarity : Unidir
5KP85B DIODES

获取价格

Trans Voltage Suppressor Diode, 5000W, Unidirectional, 1 Element, Silicon
5KP85B LITTELFUSE

获取价格

Trans Voltage Suppressor Diode, 5000W, 85V V(RWM), Unidirectional, 1 Element, Silicon, ROH
5KP85-B LITTELFUSE

获取价格

TVS DIODE
5KP85-B RECTRON

获取价格

Trans Voltage Suppressor Diode, 5000W, Unidirectional, 1 Element, Silicon, PLASTIC, R-6, 2
5KP85B-2 LITTELFUSE

获取价格

Trans Voltage Suppressor Diode, 5000W, Unidirectional, 1 Element, Silicon
5KP85B-2 CRYDOM

获取价格

Trans Voltage Suppressor Diode, 5000W, Unidirectional, 1 Element, Silicon
5KP85-BP MCC

获取价格

Trans Voltage Suppressor Diode, 5000W, 85V V(RWM), Unidirectional, 1 Element, Silicon, ROH
5KP85-BP-HF MCC

获取价格

Trans Voltage Suppressor Diode, 5000W, 85V V(RWM), Unidirectional, 1 Element, Silicon,
5KP85C SURGE

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts