TransientVoltage Suppression Diodes
Axial Leaded – 5 kW > 5KP series
Pb e3
RoHS
5KP Series
Description
The 5KP Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Uni-directional
Features
Bi-directional
• 5 kW peak pulse
• Typical IR less than 2μA
when VBR min>12V
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in P600 package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC 61000-4-2 ESD
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• UL Recognized compound
meeting flammability
rating V-0
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
PPPM
Value
5
Unit
kW
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink atTL=75ºC
PD
8.0
W
A
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
IFSM
400
30kV(Air), 30kV (Contact) • Pb-free E3 indicates that
2nd level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Low incremental surge
resistance
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
VF
3.5/5.0
V
Operating Junction and Storage
Temperature Range
TJ, TSTG -55 to 175
°C
TypicalThermal Resistance
Junction to Lead
RθJL
RθJA
8.0
40
°C/W
°C/W
TypicalThermal Resistance
Junction to Ambient
Applications
Notes:
TVS componants are ideal for the protection of I/O
interfaces, VCC bus and other vulnerable circuits used in
telecom, computer, industrial and consumer electronic
applications.
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Functional Diagram
Additional Infomarion
Bi-directional
Datasꢀeet
Saꢀples
ꢀesourꢁes
Cathode
Anode
Uni-directional
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/08/18