Features
Applications
nꢀ RoHSꢀcompliant*ꢀandꢀhalogenꢀfree**
nꢀ SurfaceꢀmountꢀSMCꢀpackage
nꢀꢀStandoffꢀvoltage:ꢀ12ꢀtoꢀ43ꢀvolts
nꢀ PeakꢀPulseꢀPower:ꢀ5000ꢀwatts
nꢀ AEC-Q101ꢀcompliant***
nꢀ Protectionꢀofꢀpowerꢀbuses
nꢀ ProtectionꢀofꢀI/Oꢀinterfaces
nꢀꢀOvervoltageꢀtransientꢀprotection
nꢀ Automotiveꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀ-ꢀEntertainmentꢀapplicationsꢀ
ꢀꢀꢀꢀꢀ-ꢀComfortꢀapplications
nꢀ Telecom,ꢀcomputer,ꢀindustrialꢀandꢀꢀ
consumerꢀelectronicsꢀapplications
ꢀ
ꢀ
5.0SMDJ-QꢀTransientꢀVoltageꢀSuppressorꢀDiodeꢀSeriesꢀ
General Information
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC)
size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 12 V up to 43 V and Breakdown
Voltage up to 52.8 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration
minimizes roll away.
Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted)
A
Parameter
Symbol
Value
Unit
(Note 1,2)
Minimum Peak Pulse Power Dissipation (T = 1 ms)
p
P
5000
Watts
PK
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method)
I
300
Amps
FSM
(Note 3,4)
Steady State Power Dissipation @ TL = 50 °C
P
6.5
5
Watts
Volts
M(AV)
Maximum Instantaneous Forward Voltage @ I = 100 A
PP
V
F
J
(For Unidirectional Units Only)
Operating Temperature Range
Storage Temperature Range
T
-55 to +150
-55 to +150
°C
°C
T
STG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 °C per Pulse Derating Curve.
A
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal.
How to Order
5.0SMDJ 12 CA - Q
Package
Asia-Pacific:
5.0SMDJ = SMC/DO-214AB
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Working Peak Reverse Voltage
12 = 12 V
(Volts)
RWM
Suffix
Europe:
Tel: +36 88 520 390
Email: eurocus@bourns.com
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
AEC-Q101 Compliant Suffix
Q = AEC-Q101 Compliant, 3000 pcs. per 13-inch Reel
QH = AEC-Q101 Compliant, 500 pcs. per 7-inch Reel
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
*ꢀꢀ RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.ꢀ
**ꢀ Bournsꢀconsidersꢀaꢀproductꢀtoꢀbeꢀ“halogenꢀfree”ꢀifꢀ(a)ꢀtheꢀBromineꢀ(Br)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀ(b)ꢀtheꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀandꢀ(c)ꢀtheꢀtotalꢀBromineꢀ(Br)ꢀꢀ
ꢀꢀꢀꢀꢀ andꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ1500ꢀppmꢀorꢀless.
***ꢀQꢀsuffixꢀforꢀautomotiveꢀandꢀotherꢀapplicationsꢀrequiringꢀappropriateꢀAEC-Q101ꢀcomplianceꢀforꢀelectronicꢀlimiters.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.