Automotive and High Reliability TVS Diodes
Surface Mount – 5000W > 5.0SMDJ-H Series
Trustworthy electronic circuit protection expert
5.0SMDJ-H Series
General Information
The 5.0SMDJ-H series is designed to protect voltage sensitive components
from high voltage, high energy transients. They have excellent clamping capability,
high surge capability, low zener impedance and fast response time. The 5.0SMDJ-H
series is supplied in YINT Semiconductor’s exclusive, cost-effective, highly reliable
and is ideally suited for use in communication systems, automotive, numerical
controls , process controls, medical equipment, business machines, power supplies
and many other industrial/consumer Applications.
Molded plastic
Features
glass passivated junction.
Case: DO-214AB/SMC
For surface mounted applications in order to optimize board space.
Polarity: Color band denoted positive end (cathode) except Bidirectional.
Typical failure mode is short from over-specified voltage or current
High Temperature soldering:260°C/10 seconds at terminals.
Terminal: Solder plated, solderable per MIL-STD-750,Method 2026.
Applications
TVS devices are ideal for the
protection of I/O Interfaces, VCC bus
and other vulnerable circuits used in
Telecom, Computer, Industrial and
Consumer electronic applications.
Electrical Characteristics (@ TA = 25°C Unless Otherwise Noted)
Parameter
Symbol
Value
5000
Unit
Minimum Peak Pulse Power Dissipation (T = 1 ms) (note 2)
PPK
Watts
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
IFSM
300
Amps
Steady State Power Dissipation @ TL = 50 °C
PM(AV)
VF
6.5
5
Watts
Volts
Maximum Instantaneous Forward Voltage @ I PP = 50 A
(For Unidirectional Units Only)
Operating Temperature Range
Storage Temperature Range
TJ
-55 to +150
-55 to +150
°C
°C
TSTG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.
Electrical Characteristics (TA = 25 °C unless otherwise noted)
www.yint.com.cn
Rev:19.3
1