5.0SMDJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS
VOLTAGE RANGE
11 to 440 Volts
FEATURES
* For surface mount application
5000 Watts Peak Power
* Built-in strain relief
* Excellent clamping capability
DO-214AB
* Low profile package
* Fast response time: Typically less than
1.0ps from 0 volt to BV min.
.124(3.15)
.108(2.75)
.245(6.22)
.220(5.59)
* Typical IR less than 1 A above 10V
.280(7.11)
.260(6.60)
.012(0.31)
.006(0.15)
MECHANICAL DATA
.103(2.62)
.079(2.00)
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Solderable per MIL-STD-202,
method 208 guranteed
.008
(.203)
.050(1.27)
.030(0.76)
MAX.
.320(8.13)
.305(7.75)
* Polarity: Color band denotes cathode end except Bidirectional
* Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATINGS
SYMBOL
VALUE
UNITS
Peak Power Dissipation at TA=25 C, TP=1ms(NOTE 1)
PPK
Minimum 5000
Watts
Power Dissipation on infinite heatsink at TL=75 C
PD
6.5
Watts
Peak Forward Surge Current at 8.3ms Single Half Sine-Wave
superimposed on rated load (JEDEC method) (NOTE 3)
IFSM
300
Amps
Maximum Instantenous Forward Voltage at 100A for
Unidirectional only
VF
3.5/5.0
Volts
Operating and Storage Temperature Range
TJ, TSTG
-55 to +150
C
NOTES:
1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 C per Fig. 2.
2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types 5.0SMDJ11 thru 5.0SMDJ440.
2. Electrical characteristics apply in both directions.
388