Small size – Safety Agency approved – Metalized
Polypropylene
FEATURES
EMI filters – Line bypass – Across the line – Antenna
coupling
APPLICATIONS
Operating Temperature Range
Capacitance Tolerance
-40°C to +110°C
+10% at 1 kHz, 20°C
CSA
ENEC
CQC
275 VAC
UL
AC voltage
(50/60 Hz)
250/310
VAC
250/310 VAC
305 VAC
Tan δ
Dissipation Factor
at 1 kHz and 20°C
.1% Max
Capacitance
<0.33uF
Terminal to Terminal
Terminal to Case
Insulation Resistance
@20°C (<70% RH)for 1 minute
at 100VDC applied
>30000 MΩ at 100VDC
>5000 MΩ at 500VDC
>30000 MΩ at 100VDC
>5000 MΩ at 500VDC
15000 MΩ
>0.33uF
5000 MΩxuF
Self Inductance
<1 nano-Henry per mm of lead spacing and lead length
C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds
C>.0068uF, 1000 VAC or 1768 VDC applied for 60 seconds
Cut-off current: 2A ac or 10mAdc
Terminal to Terminal
Dielectric Strength
Current limiting resistance: 1Ω/V
2050VDC applied between the terminals and case for 60 Seconds
and 20°C
Terminal to case
1000 hours at 110°C at 125% of rated voltage with once every hour the voltage is
increased to 1000 VAC for 0.1 seconds
Capacitance change
Dissipation Factor
<10% of initially measured value
<1.0% at 1kHz
>100% of initially specified value (T-T)
>3000 MΩ (Terminal to case)
Life Expectancy
Humidity test
Insulation Resistance
500 Hours at 90 to 95% RH, 40C and no voltage applied after which the following
voltage will be applied for 1 minute to each capacitor.
C<0.0068uF 1500VAC, C>0.0068uF 1075VAC
Capacitance change
Dissipation Factor
<10% of initially measured value
<1.0% at 1kHz
>50% of initially specified value (T-T)
>15000 MΩ (Terminal to case)
C< 1uF Vp=2.5kVDC
Insulation Resistance
Impulse voltage
(24 pulses)
C> 1uF Vp=2.5kV √C
Capacitance temperature
coefficient
-200ppm/°C, +100ppm/°C
Construction
Electrodes
Metallized Polypropylene film
Vacuum deposited Metal layers
Coating
Lead terminations
Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0)
Lead free tinned copper leads