Emergency Stop Devices
Cable (Rope) Pull Switches
Lifeline 4
Specifications
Standards
EN60947-5-5, ISO13850, ISOTR 12100,
IEC 60947-5-1, EN 418
Approvals
CE marked for all applicable directive,
cULus and BG
Safety Contact
2 N.C. or 3 N.C. or 4 N.C. direct
opening action
Designation/Utilization Cat.
A600/AC-15 (Ue)
(Ie)
N600/DC-13 (Ue)
(Ie)
600V 500V 240V 120V
1.2A 1.4A 3A 6A
600V 500V 250V 125V
0.4A 0.55A 1.1A 2.2A
10A
5V 5mA
>2 x 2mm (0.078in)
(Ui) 500V
Thermal Current (lth)
Minimum Current
Safety Contact Gap
Rtd. Insulation Voltage
Rtd. Impulse withstand
Voltage
Description
(Uimp) 2500V
The Lifeline 4 cable/push button operated system can be installed
along or around awkward machinery such as conveyors and provide
a constant emergency stop access.
Pollution Degree
Max. Actuation Frequency
Case Material
Eye Nut Material
Emergency Stop & Indicator Acetal
Material
3
1 Cycle per sec
Heavy duty die cast alloy
Stainless Steel
The Lifeline 4 is the only device of its kind to incorporate the
following features in one unit making it the most versatile cable
switch on the market.
1. The positive mode mechanism ensures that the contacts are
immediately latched open on actuation and can only be reset by
the intentional action of turning the blue reset knob. The design
also protects against nuisance tripping and the effects of thermal
expansion.
2. A mushroom head emergency stop button is included on the unit
to provide E-Stop access even at the extreme ends of the span.
3. The cable status indicator makes the system easy to set up and
maintain for spans up to 125 meters.
4. Four sets of contacts are provided: 2 N.C. + 2 N.O., 3 N.C. +
1 N.O., or 4 N.C. contacts.
5. Sealed to IP 66 with rugged construction using die cast alloy and
stainless steel to withstand harsh conditions.
Protection
Conduit Entry
IP66
3 x M20, 3 x 1/2in NPT, quick-
disconnect style
-25°C to 80°C (-13°F to 176°F)
<125N (300mm deflection;
28.1lb deflection)
75m (246ft) standard model
75m to 125m extended length model
4 x M5
Any position
1,000,000
630g (1.38lb)
Yellow body, Red E-Stop button,
Blue reset button
Operating Temperature
Operation Force
Max Cable Span Between
Switches
Fixing
Mounting
Mechanical Life
Weight
Colour
Features
Im portant: It is recommended that the LRTS (Lifeline
Rope Tensioning System) should be used
with the Lifeline 4 cable rope switch.
•
•
•
Switches up to 125 meter span
Universal mounting and operation
Lid mounted emergency stop button, designed to conform to
EN418
•
•
Switch lockout on cable pulled and cable slack
Cable status indicator on switch lid
Lid m ounted E-Stop button
Cable status indicator on
lid
The cable status indicator makes
the system easy to setup and
maintain for spans up to 125
meters.
A mushroom head emergency stop
button is included on the unit to
provide total E-Stop access even at
the extreme ends of the span.
6-8