3KP5.0 thru 3KP220CA
Transient Voltage Suppressors
Peak Pulse Power 3000W Stand-off Voltage 5.0 to 220V
Features
ꢀ Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
ꢀ Glass passivated chip junction in P-600/R-6 package
ꢀ 3000W Peak Pulse Power capability at on 10/1000uS waveform
ꢀ Excellent clamping capability
ꢀ Low zener impedance
ꢀ Repetition rate(Duty Cycle):.05%
ꢀ Fast response time: typically less than 1.0 ps from 0 volts to BV
min
ꢀ Typical IR less than 1uA above 10V
ꢀ High temperature soldering guaranteed: 260oC/10 seconds/
.375",(9.5mm) lead length/5lbs., (2.3kg) tension
Mechanical Data
ꢀ Case: JEDEC P600 molded plastic
ꢀ Terminals: Axial leads, solderable per MIL-STD-750, Method
2026
ꢀ Polarity: Color band denoted cathode except Bipolar
ꢀ Mounting Position: Any
ꢀ Weight: 0.07 ounce, 2.1 grams
For Bidirectional use C or CA Suffix for types 3KP5.0 thru types 3KP220
Electrical characteristics apply in both directions.
Maximum Ratings and Thermal Characteristics
Ratings at 25oC ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
(1)
Peak Power Dissipation at TA=25oC, TP=1ms
PPPM
IPPM
Minimum 3000
See Next Table
8.0
W
A
Peak pulse current with a 10/1000us waveform (1)
Steady state power dissipation
PM(AV)
W
at TL=75oC, lead lengths 0.375" (9.5mm) (2)
(3)
Peak forward surge current, 8.3ms single half sine-wave
Operating junction and storage temperature range
IFSM
250
Amps
oC
TJ, TSTG
-55 to +175
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2
2. Mounted on copper pad area of 0.79 x 0.79" (20 x 20 mm) per Fig. 5.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
606