3M™ Wiremount Socket
.100” × .100” for .050” Pitch Cable (Optional Plastic or Metal Strain Relief)
3000 Series
•ꢀ IndustryꢀstandardꢀIDCꢀsocket
•ꢀ Positiveꢀlockingꢀmetalꢀ“J”ꢀclipsꢀprovideꢀhighꢀcoverꢀretention
•ꢀ Matesꢀwithꢀ3Mꢀheaders,ꢀplugsꢀandꢀpinꢀstripsꢀforꢀquickꢀconnect/
disconnectꢀcapability
•ꢀ Openꢀorꢀclosedꢀendꢀcoversꢀavailable
•ꢀ Acceptsꢀflatꢀcableꢀorꢀdiscreteꢀwire
•ꢀ Militaryꢀpolarization,ꢀwithꢀorꢀwithoutꢀcenterbump
•ꢀ Transferꢀadhesiveꢀonꢀcoversꢀprovidesꢀprecisionꢀalignmentꢀ
betweenꢀconnectorꢀandꢀcablesꢀresultingꢀinꢀhighꢀyieldꢀterminations
•ꢀ Availabilityꢀofꢀpullꢀtabꢀtoꢀfacilitateꢀproperꢀunplugging
•ꢀ Availabilityꢀofꢀ2ꢀtypesꢀofꢀstrainꢀreliefꢀ(standardꢀandꢀlowꢀprofile)ꢀtoꢀ
isolateꢀtheꢀIDCꢀinterface
•ꢀ SetꢀtheꢀstandardꢀforꢀMILꢀspecꢀandꢀIECꢀstandardization
•ꢀ AvailabilityꢀofꢀMilitaryꢀandꢀCenterꢀBumpꢀpolarization
•ꢀ SeeꢀtheꢀRegulatoryꢀInformationꢀAppendixꢀ(RIA)ꢀinꢀtheꢀ“RoHSꢀ
compliance”ꢀsectionꢀofꢀwww.3mconnectors.comꢀforꢀcomplianceꢀ
informationꢀ(RIAꢀE1ꢀ&ꢀC1ꢀapply)
Date Modified: October 12, 2011
TS-0718-F
Sheet 1 of 3
Physical
Insulation:
Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0
Color: Gray
Contact:
Material: CopperAlloy
JꢀClipꢀMaterial: Stainless Steel
Plating:
Underplating and U-Slot:
100 μ” [ 2.54 μm ] Nickel
WipingArea: 30 μ” [ 0.76 μm ] Gold
WireAccommodation: 26 and 28AWG Solid and Stranded
Marking: 3M Logo, Part Identification Number and Orientation Triangle
Electrical
Current Rating:
1 Line
4.75
4.50
6Adjacent Lines
All Lines
1.00
1.00
26AWG
28AWG
2.00
1.75
Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise, 20% derated.
Reference appropriate 3M Product Specification for detailed current derating curves.
> 1 × 109Ω at 500 VDC
Insulation Resistance:
Withstanding Voltage: 1000 VRMS at Sea Level
Environmental
Temperature Rating: -55°C to +105°C
ULꢀFileꢀNo.:ꢀE68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com