Datasheet > 314014--1

314014--1

更新时间： 2024-11-30 01:06:39

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
4页	146K
描述
Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY.

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

314014--1 数据手册

Instruction Sheet

Terminating Head 58063-2

For AMPLIMITE* High Density (HDE)-20

Connectors

408-9414

20 DEC 10 Rev B

Wire Guide

Anti -Backup

Pawl

Wire Inserter

Feed Slide

Adjuster

(Inserter Rod)

Feed Channel

Figure 1

Adjuster (inserter rod)—is a piston for, and regulates

the travel of, the wire inserter.

1. INTRODUCTION

Terminating Head 58063--2 is designed to terminate

unstripped discrete wire sizes 30 through 20 AWG

onto AMPLIMITE HDE--20 all plastic connectors

(reference part number 745203--2) and metal shell

connectors (reference part number 745492--2). These

connectors contain insulation displacement contacts.

Feed slide—automatically advances the connector

after each termination.

Anti--backup pawl—prevents the connector from

moving out of position after it has been advanced by

the feed slide.

The head must be used with one of the following

power units (for operating procedure, refer to the

instructions packaged with the power unit).

After the head is installed onto the power unit, it

serves as a guide and support for the connector

during termination. The arrow on the top of the head

indicates the direction that the connector will move in

the head. The wires are terminated onto the

connector using the insulation displacement

technique.

Instruction Sheet (408) or

Power Unit

Customer Manual (409)

Pistol Grip Manual Handle

408--6790

Assembly 58074--1

Pistol Grip Pneumatic Handle

408--6789

3. TERMINATION PROCEDURE

Assembly 58075--1

Make sure that the connector matches the wire size

to be terminated, then refer to Figure 2, and proceed

as follows:

Pneumatic Power Bench

408--9393

Assembly 58338--1

Electric Power Unit 931800--1

409--5746

1. Align the side of the connector with the side of

the head (so that it will move in the direction of the

arrow), and slowly slide the connector into the feed

channel. Stop when the desired contact position

aligns with the wire slot.

Dimensions in this instruction sheet are in metric

units [with U.S. customary units in brackets].

Figures are not drawn to scale.

NOTE

If the connector cannot be inserted into the head

or if the connector is too loose in the head, refer

to Paragraph 4.2 for wire guide adjustment.

NOTE

Reasons for reissue of this instruction sheet are

provided in Section 7, REVISION SUMMARY.

2. DESCRIPTION (Figure 1)

2. Insert the wire into the wire slot until the wire

bottoms on the head.

Features of the head and their function are as follows:

Wire inserter—forces the wire into the slotted beams

of the contact.

3. Center the wire in the wire slot, then actuate the

power unit until the wire inserter bottoms (the wire

inserter will retract, and the connector will advance

to the next contact position).

Wire guide—holds the connector properly in relation

to the wire.

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

E2010 Tyco Electronics Corporation, Berwyn, PA

1 of 4

TE logo and Tyco Electronics are trademarks.

LOC B

*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与314014--1相关器件

型号	品牌	获取价格	描述	数据表
314015	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Ceramic Body
314015P	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Ceramic Body
31402	WURTH	获取价格	Flexible absorber foil WE-FAS for RFID
314020	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Ceramic Body
3140-2-00-01-00-00-08-0	MILL-MAX	获取价格	PCB Terminal
3140-2-00-21-00-00-08-0	MILL-MAX	获取价格	PCB Terminal, ROHS COMPLIANT
3140-2-00-34-00-00-08-0	MILL-MAX	获取价格	PCB Terminal, ROHS COMPLIANT
3140-2-00-80-00-00-08-0	MILL-MAX	获取价格	PCB Terminal, ROHS COMPLIANT
314020P	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Ceramic Body
31402-2100	MOLEX	获取价格	MX64 Single Row Sealed Connectors

与314014--1相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

51
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

41
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

69
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

65

产品中心

服务支持

精选活动

关于我们

帮助中心

314014--1

314014--1 数据手册

与314014--1相关器件

与314014--1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

314014--1

314014--1 数据手册

与314014--1相关器件

与314014--1相关文章

您还可以找

您在本页遇到什么问题？