TransientVoltage Suppression Diodes
Axial Leaded – 30000W > 30KPA series
Pb e3
RoHS
30KPA Series
Descriptions
The 30KPA Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Uni-directional
Features
Bi-directional
• 30kW peak pulse
• Low incremental surge
resistance
• Typical IR less than 2μA
when VBR min>73V
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in P600 package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact) • Halogen free and RoHS
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
PPPM
Value
30
Unit
kW
• UL Recognized epoxy
meeting flammability
rating V-0
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.2)
(Note 1)
• Matte tin lead–free plated
Steady State Power Dissipation on
Infinite Heat Sink atTL=75ºC
PD
8.0
W
A
compliant
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
IFSM
400
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Operating Junction and Storage
Temperature Range
TJ, TSTG -55 to 175
°C
TypicalThermal Resistance
Junction to Lead
RθJL
RθJA
8.0
40
°C/W
°C/W
TypicalThermal Resistance
Junction to Ambient
Applications
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.
TVS components are ideal for the protection of I/O
interfaces, VCC bus and other vulnerable circuits used in
telecom, computer, industrial and consumer electronic
applications.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Functional Diagram
Additional Infomarion
Datasꢀeet
Saꢀples
ꢀesourꢁes
Bi-directional
Cathode
Anode
Uni-directional
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/20/18