Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
n
n
n
Pin assignment similar to ISO 7588 part 1
Plug-in or PCB terminals
Also available for 42VDC applications
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching
or Mini Relay Latching
– For shrouded/weatherproof dust cover versions refer to
Shrouded Power Relay F4 A and VF4 A
F134co_fcw1
Typical applications
Cross carline up to 40A for example: ABS control, blower fans, car alarm,
cooling fan, Electric Power Steering, energy management, engine control,
fuel pump, heated front screen, lamps: front, rear, fog light, main switch/
supply relay, valves, wiper control.
Contact Data
Contact arrangement
Contact gap
1 form A, 1 NO/1 NO (2x87)
1 form U, 2 NO
1 form C, 1 CO
>0.8mm
Rated voltage
Limiting continuous current
23°C
12VDC
NO
60A
40A
17A
24VDC
NO
60A
40A
17A
12VDC
NO
2x32A
2x25A
2x11A
24VDC
NO
2x32A
2x25A
2x11A
12VDC
NO/NC
60/45A
40/30A
17/12A
24VDC
NO/NC
60/45A
40/30A
17/12A
24VDC1)
NO/NC
60/45A
40/30A
17/12A
85°C
125°C
Limiting making current2)
NO/NC
120A
60A
120A
20A
2x100A
2x40A
2x100A
2x15A
120/45A
60/40A
120/45A
20/15A
120/45A
30/20A
Limiting breaking current
NO/NC
Limiting short-time current
overload current, ISO 8820-33):
1.35 x 40A, 1800s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
1.35 x 40A, 1800s
1.35 x 40A, 1800s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
Jump start test
ISO 16750-1
24VDC for 5min conducting nominal current at 23°C
Contact material
silver based
1A at 5VDC
Min. recommended contact load4)
Initial voltage drop
NO contact at 10A, typ./max.
NC contact at 10A, typ./max.
Frequency of operation
at nominal load
Operate/release time typ.
Electrical endurance
resistive load at 14 VDC
15/200mV
15/200mV
2x15/200mV
2x15/200mV
15/200mV
20/250mV
15/200mV
20/250mV
15/200mV
20/250mV
6 ops./min (0.1Hz)
7/2ms5)
>2x105 ops.
40A
>2x105 ops.
2x25A
>2x105 ops.
40A (NO)
resistive load at 28VDC
ops.
>1x105 ops.
20A
>1x105 ops.
2x15A
>1x105 ops.
20A (NO)
1x105 ops.
30A (NO)
>5x105 ops.
10A (NC)
Mechanical endurance
DC coil
>1x107ops.
1) Special high performance 24VDC version with contact gap >0.8mm, part number V23134-A0056-X432/-X433 (see part number table).
2) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of
maximum 3s for a make/break ratio of 1:10.
3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher
risk of contact tack welding.
1
06-2012, Rev. 0612
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
