Datasheet > 2SJ581

2SJ581

更新时间： 2024-02-14 20:00:03

品牌	Logo	应用领域
日电电子 - NEC		开关脉冲晶体管
页数	文件大小	规格书
4页	36K
描述
Power Field-Effect Transistor, 12A I(D), 60V, 0.185ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, MP-10, ISOLATED TO-220, 3 PIN

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

2SJ581 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	SFM	包装说明：	IN-LINE, R-PSIP-T3
针数：	3	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8541.29.00.95
风险等级：	5.21	配置：	SINGLE WITH BUILT-IN DIODE
最小漏源击穿电压：	60 V	最大漏极电流 (Abs) (ID)：	12 A
最大漏极电流 (ID)：	12 A	最大漏源导通电阻：	0.185 Ω
FET 技术：	METAL-OXIDE SEMICONDUCTOR	JESD-30 代码：	R-PSIP-T3
元件数量：	1	端子数量：	3
工作模式：	ENHANCEMENT MODE	最高工作温度：	150 °C
封装主体材料：	PLASTIC/EPOXY	封装形状：	RECTANGULAR
封装形式：	IN-LINE	峰值回流温度（摄氏度）：	260
极性/信道类型：	P-CHANNEL	最大功率耗散 (Abs)：	1.8 W
最大脉冲漏极电流 (IDM)：	48 A	认证状态：	Not Qualified
子类别：	Other Transistors	表面贴装：	NO
端子形式：	THROUGH-HOLE	端子位置：	SINGLE
处于峰值回流温度下的最长时间：	NOT SPECIFIED	晶体管应用：	SWITCHING
晶体管元件材料：	SILICON	Base Number Matches：	1

2SJ581 数据手册

2SJ581

• The information contained in this document is being issued in advance of the production cycle for the

device. The parameters for the device may change before final production or NEC Corporation, at its own

discretion, may withdraw the device prior to its production.

• No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in

this document.

• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property

rights of third parties by or arising from use of a device described herein or any other liability arising from use

of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other

intellectual property rights of NEC Corporation or others.

• Descriptions of circuits, software, and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these circuits,

software, and information in the design of the customer's equipment shall be done under the full responsibility

of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third

parties arising from the use of these circuits, software, and information.

• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,

the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or

property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety

measures in its design, such as redundancy, fire-containment, and anti-failure features.

• NEC devices are classified into the following three quality grades:

"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a

customer designated "quality assurance program" for a specific application. The recommended applications of

a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device

before using it in a particular application.

Standard: Computers, office equipment, communications equipment, test and measurement equipment,

audio and visual equipment, home electronic appliances, machine tools, personal electronic

equipment and industrial robots

Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support)

Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems or medical equipment for life support, etc.

The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.

If customers intend to use NEC devices for applications other than those specified for Standard quality grade,

they should contact an NEC sales representative in advance.

M5 98. 8

1 2 34

下载PDF

与2SJ581相关器件

型号	品牌	描述	获取价格	数据表
2SJ581-AZ	RENESAS	12A, 60V, 0.185ohm, P-CHANNEL, Si, POWER, MOSFET, MP-10, ISOLATED TO-220, 3 PIN	获取价格
2SJ583	SANYO	Ultrahigh-Speed Switching Applications	获取价格
2SJ583LS	SANYO	Ultrahigh-Speed Switching Applications	获取价格
2SJ584LS	SANYO	Ultrahigh-Speed Switching Applications	获取价格
2SJ585LS	SANYO	Ultrahigh-Speed Switching Applications	获取价格
2SJ586	HITACHI	Silicon P Channel MOS FET High Speed Switching	获取价格

与2SJ581相关文章

ADS1256的资料手册解读、采集电压范围、读数变化原因分析及实际测量遇到的问题
2024-05-14

1
MAX6675资料手册参数详解、引脚配置说明
2024-05-13

11
LM258引脚图及功能介绍、主要参数分析
2024-05-13

7
CD4052资料手册参数详解、引脚配置说明
2024-05-13

7

产品中心

服务支持

精选活动

关于我们

帮助中心

2SJ581

2SJ581 技术参数

2SJ581 数据手册

与2SJ581相关器件

与2SJ581相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2SJ581

2SJ581 技术参数

2SJ581 数据手册

与2SJ581相关器件

与2SJ581相关文章

您还可以找

您在本页遇到什么问题？